🥝GuideKiwi
Free Guide

Learn About Winter Thermostat Settings for Your Home

Understanding How Home Thermostats Work in Winter A thermostat is a device that controls your heating system by monitoring the temperature inside your home a...

GuideKiwi Editorial Team·

Understanding How Home Thermostats Work in Winter

A thermostat is a device that controls your heating system by monitoring the temperature inside your home and turning the furnace or heat pump on and off as needed. During winter months, your thermostat becomes one of the most important tools for maintaining comfort while managing energy costs. Understanding how it works helps you make better decisions about temperature settings throughout the cold season.

When you set your thermostat to a specific temperature—let's say 68 degrees Fahrenheit—the device continuously measures the actual temperature in your home. If the actual temperature drops below your set point, the thermostat sends a signal to your heating system to turn on. Once your home reaches the target temperature, the thermostat signals the heating system to shut down. This cycle repeats throughout the day and night.

Different types of thermostats offer varying levels of control. Manual thermostats require you to physically adjust the temperature by hand each time you want a change. Programmable thermostats allow you to set different temperatures for different times of day—for example, a lower temperature at night and a higher temperature in the morning. Smart thermostats use sensors and algorithms to learn your habits and adjust temperatures automatically, though they still require you to make final decisions about settings.

The location of your thermostat matters significantly. It should be placed on an interior wall, away from direct sunlight, drafts, windows, and doors. If your thermostat is in a cold spot or near a window, it may read lower temperatures than the rest of your home, causing your heating system to run more often than necessary. Poor thermostat placement can waste energy and inflate your heating bills.

Practical Takeaway: Locate your home's thermostat and note whether it's manual, programmable, or smart. Check its placement—if it's near a window, door, or exterior wall, this may be affecting its readings and your heating efficiency. Understanding your thermostat type will help you use it more effectively during winter.

Recommended Winter Temperature Settings

The U.S. Department of Energy recommends setting your thermostat to 68 degrees Fahrenheit (20 degrees Celsius) while you're awake and home during winter. This temperature balances comfort with energy efficiency for most households. At 68 degrees, most people find the environment comfortable for normal activities while wearing typical indoor clothing like long sleeves and pants.

When you're away from home or sleeping, lowering the thermostat can produce significant energy savings. The Department of Energy notes that lowering your temperature by 7 to 10 degrees Fahrenheit for eight hours each day can reduce your heating costs by approximately 10 percent annually. For example, if your heating costs $1,000 per winter season, this adjustment could save you around $100 per year.

Specific temperature recommendations for different situations include:

  • During sleep hours: 62 to 66 degrees Fahrenheit (most people sleep better in slightly cooler environments)
  • When away during the day: 62 to 65 degrees Fahrenheit (prevents pipes from freezing while minimizing energy use)
  • When home and awake: 68 to 72 degrees Fahrenheit (personal comfort varies, but higher settings increase costs)
  • For homes with young children or elderly residents: 68 to 70 degrees Fahrenheit (these groups may need slightly warmer temperatures)

These recommendations represent starting points rather than absolute requirements. Your ideal temperature depends on factors including your personal preference, the size and insulation of your home, your heating system type, and local climate conditions. Some people find 66 degrees comfortable; others prefer 70 degrees. Finding your personal comfort zone takes some experimentation.

Practical Takeaway: Try setting your thermostat to 68 degrees Fahrenheit for a few days while home and awake. Note your comfort level and energy bills. Adjust by one or two degrees up or down based on how you feel, then establish a baseline temperature that works for your household. This personal baseline becomes your foundation for creating a heating schedule.

Creating an Effective Winter Heating Schedule

A heating schedule programs your thermostat to automatically adjust temperatures at different times throughout the day and week. Rather than manually changing the temperature each morning and evening, a programmed schedule handles adjustments automatically, reducing the temptation to leave the thermostat at a constant high temperature.

A typical winter schedule for a household where most people work outside the home might look like this:

  • Weekday mornings (6:00 AM to 8:00 AM): 70 degrees Fahrenheit (time to get ready, shower, dress)
  • Weekday daytime (8:00 AM to 5:00 PM): 65 degrees Fahrenheit (everyone away, minimal heating needed)
  • Weekday evenings (5:00 PM to 10:00 PM): 68 degrees Fahrenheit (everyone home and active)
  • Weekday nights (10:00 PM to 6:00 AM): 62 degrees Fahrenheit (sleeping hours)
  • Weekend daytime (8:00 AM to 10:00 PM): 68 to 70 degrees Fahrenheit (home and awake)
  • Weekend nights (10:00 PM to 8:00 AM): 62 degrees Fahrenheit (sleeping hours)

This schedule assumes a household with people away during regular business hours. Your schedule should reflect your actual routine. If someone works from home, you might keep the temperature at 68 degrees all day. If your household includes shift workers or students with different schedules, you might need to compromise on daytime temperatures or use a smart thermostat that accommodates multiple occupants' preferences.

When creating your schedule, remember that heating systems need time to warm your home. Most heating systems take 30 minutes to 1 hour to raise your home's temperature by 5 degrees. If you want your house at 70 degrees by 6:00 AM, you should schedule the temperature increase for 5:00 AM or 5:30 AM depending on your system.

Practical Takeaway: Write down your household's typical wake times, work/school schedules, and bedtimes for both weekdays and weekends. Using this information, create a heating schedule that includes at least three different temperatures throughout the day. If your thermostat is programmable or smart, enter this schedule and run it for two weeks before adjusting. Track your heating bills to see if the schedule reduces costs compared to running at a constant temperature.

Energy Savings Strategies Beyond Temperature Settings

While thermostat settings significantly impact your heating costs, other factors influence how much energy your heating system consumes. Understanding these additional strategies helps you maximize savings and maintain comfort throughout winter.

Insulation quality directly affects how well your home retains heat. Homes with poor insulation lose heat faster through walls, attics, and basements, forcing heating systems to run more frequently to maintain your thermostat's set temperature. The U.S. Energy Information Administration reports that heating accounts for approximately 42 percent of residential energy consumption, with much of this energy wasted through poor insulation and air leaks. Improving insulation in your attic, basement, and walls can reduce heating demands, allowing your thermostat settings to deliver the same comfort at lower costs.

Air sealing—blocking drafts around windows, doors, and other openings—prevents heated air from escaping. Weatherstripping around doors costs $10 to $20 per door and can reduce air leaks by 10 to 20 percent. Caulking around windows costs $5 to $15 per window. These low-cost improvements help your heating system work more efficiently at any thermostat setting.

Additional strategies include:

  • Using ceiling fans on low speed in reverse (clockwise) to push warm air that rises back down toward living spaces
  • Closing blinds and curtains at night to reduce heat loss through windows, then opening them during sunny days to gain free solar heat
  • Ensuring heating vents and returns are not blocked by furniture, rugs, or curtains
  • Having your heating system professionally serviced
🥝

More guides on the way

Browse our full collection of free guides on topics that matter.

Browse All Guides →