🥝GuideKiwi
Free Guide

Learn About Energy-Saving Thermostat Settings

Understanding How Thermostats Control Your Home Temperature A thermostat is a device that measures the temperature in your home and signals your heating or c...

GuideKiwi Editorial Team·

Understanding How Thermostats Control Your Home Temperature

A thermostat is a device that measures the temperature in your home and signals your heating or cooling system to turn on or off. Think of it as the control center for your home's comfort. When you set a thermostat to 70 degrees, the device continuously monitors the air temperature. If the temperature drops below your setting, the thermostat triggers your furnace or heat pump to warm things up. When the temperature reaches your target, the system shuts off. The same process works in reverse during summer—the thermostat tells your air conditioner when to run and when to stop.

Different types of thermostats offer varying levels of control. Manual thermostats require you to physically adjust the dial or buttons each time you want to change the temperature. Programmable thermostats let you schedule temperature changes for different times of day and days of the week. Smart thermostats connect to your home's Wi-Fi network and can learn your patterns, adjust automatically, and send you information through a smartphone app. Understanding what type of thermostat you have helps you use it more effectively.

The way your thermostat works directly affects how much energy your heating and cooling systems consume. According to the U.S. Department of Energy, heating and cooling account for about 42% of energy use in a typical American home. This is the largest single energy expense for most households. By using thermostat settings strategically, you can reduce this consumption without sacrificing comfort.

Your thermostat has two main settings to understand: heating mode and cooling mode. The heating mode activates your furnace or heat pump when indoor temperatures drop below your set point. The cooling mode activates your air conditioner when temperatures rise above your set point. Some thermostats also have an "auto" mode that switches between heating and cooling based on what's needed. Learning to manage these modes throughout the year forms the foundation of energy-conscious temperature control.

Practical takeaway: Read your thermostat's manual to understand whether you have a manual, programmable, or smart model. Knowing your thermostat type helps you make informed decisions about temperature settings and scheduling.

Recommended Temperature Settings for Energy Savings

The temperature you choose for your thermostat dramatically affects your energy consumption. The U.S. Environmental Protection Agency suggests that setting your thermostat to 68 degrees Fahrenheit during winter months when you are home and awake can reduce heating energy use. When you are asleep or away from home, lowering the temperature to 62 degrees or lower can generate additional savings. For every degree you lower your thermostat for eight hours each day, you can save approximately 1-3% on your heating costs, depending on your climate and home insulation.

During summer cooling season, the EPA recommends setting your thermostat to 78 degrees Fahrenheit when you are home. This temperature balances comfort with energy conservation. When you are away or sleeping, raising the temperature to 82-85 degrees reduces air conditioning energy use. Research shows that for every degree you raise your cooling setpoint for eight hours daily, you save roughly 1-3% on cooling costs. These percentages may seem small, but they add up significantly over a heating or cooling season.

Your personal comfort matters, and what works for one household may not work for another. Some people are naturally warmer or colder than average. Your age, health status, activity level, and clothing choices all influence what temperature feels comfortable. If a recommended setting doesn't feel right for your household, experiment within reasonable ranges. Even shifting your setting by 2-3 degrees can produce measurable energy savings without causing discomfort for most people.

The concept of "setback" refers to lowering your heating setpoint or raising your cooling setpoint during periods when you need less temperature control. Studies published in the Journal of the American Society for Heating, Refrigerating and Air-Conditioning Engineers show that setbacks during sleeping hours and away periods can reduce annual heating and cooling energy use by 10-15%. This assumes you maintain the lower or higher setting for at least 8 hours daily. Larger setbacks produce greater savings but may affect your comfort when you return home.

Practical takeaway: Start with 68 degrees in winter and 78 degrees in summer as your baseline, then adjust up or down by 1-2 degrees based on your comfort preferences. Even small adjustments, maintained consistently, produce measurable energy and cost reductions over time.

Using Programmable Thermostat Schedules

A programmable thermostat allows you to set different temperatures for different times of day without manually adjusting it each time. This automation helps you maintain lower temperatures when you don't need heating or higher temperatures when you don't need cooling. Most programmable thermostats offer at least two daily schedules—one for weekdays and one for weekends—with four or more temperature change points per day. This flexibility means your home can be comfortable during times you're typically there while using less energy during other periods.

Creating an effective schedule starts with understanding your household's routine. For a typical family where everyone leaves for work and school at 7 a.m. and returns around 5 p.m., a good winter schedule might look like this: 68 degrees from 6 a.m. to 7 a.m. (morning comfort), 62 degrees from 7 a.m. to 5 p.m. (away period), 68 degrees from 5 p.m. to 10 p.m. (evening comfort), and 62 degrees from 10 p.m. to 6 a.m. (sleeping period). This schedule takes advantage of unoccupied periods while maintaining comfort when people are home.

Summer cooling schedules work similarly but in reverse. You might set your thermostat to 78 degrees during away and sleeping periods, then cool your home to 76 degrees during evening and morning hours when you're home. The goal remains the same: minimize cooling energy use during unoccupied periods while maintaining reasonable comfort when occupied. If your household includes people who work from home or attend school remotely, your schedule needs adjustment. Someone present during daytime hours means you should maintain closer-to-normal temperatures throughout the day.

Many programmable thermostats include a "hold" feature that overrides your schedule when needed. If you're sick and want to stay home on a day you'd normally be away, or if you're hosting a gathering, you can use hold to maintain your preferred temperature without permanently changing your schedule. Some models automatically return to the regular schedule after a set period, while others require manual reset. Understanding your thermostat's hold function prevents energy waste from unintended schedule overrides.

Practical takeaway: Map out when your household is typically home versus away, then create a schedule with lower heating setpoints or higher cooling setpoints during unoccupied periods. Write down your schedule and post it near your thermostat for reference when making adjustments.

Smart Thermostat Learning Features and Benefits

Smart thermostats represent the latest technology in home temperature control. Unlike programmable thermostats that require you to create and input schedules manually, smart thermostats use built-in sensors and algorithms to learn your household's patterns automatically. They track when people are home, when everyone leaves, and when you typically adjust the temperature. After several weeks of observing your behavior, smart thermostats can predict your preferences and adjust temperatures accordingly without any input from you.

Smart thermostats also sense when no one is home using motion sensors, smartphone location data, or integration with your home's security system. When they detect occupancy absence, they automatically enter an "away" mode with reduced heating or increased cooling setpoints. When they detect your return home, they adjust back to comfort settings. This automation means your home is appropriately comfortable when you arrive without requiring you to remember to program changes. Research from the Electric Power Research Institute found that homes with smart thermostats reduced energy use by an average of 10-15% compared to homes with standard programmable thermostats.

Remote access through smartphone apps is another key smart thermostat feature. This allows you to view your current home temperature from anywhere and adjust your thermostat if plans change unexpectedly. If you're away from home and plans change, allowing you to leave work early, you can warm or cool your home before you arrive. If you unexpectedly extend your absence, you can increase your setback even further. This flexibility, combined with automatic learning, creates energy savings that go beyond what most people achieve with standard programmable thermostats.

Many smart thermostats

🥝

More guides on the way

Browse our full collection of free guides on topics that matter.

Browse All Guides →