How to Replace Your Dyson Filter Guide
Understanding Dyson Filter Types and When Replacement Is Needed Dyson vacuum cleaners use different types of filters depending on the model you own. The most...
Understanding Dyson Filter Types and When Replacement Is Needed
Dyson vacuum cleaners use different types of filters depending on the model you own. The most common filter types include HEPA filters, pre-filters, and post-motor filters. HEPA stands for High-Efficiency Particulate Air, which means these filters can capture particles as small as 0.3 microns. Understanding which filter your Dyson model uses is the first step in maintaining your vacuum's performance.
Your Dyson filter typically needs replacement every 12 months with regular use, though this timeline varies based on how often you vacuum and the types of debris you pick up. If you have pets, allergies, or use your vacuum frequently, you may need to replace filters more often. Some signs that your filter needs attention include reduced suction power, the vacuum shutting off unexpectedly, or a burning smell during operation.
Different Dyson models have different filter configurations. For example, some upright models have both a pre-filter and a main filter, while cordless models like the V15 or V11 may have a different setup. The model number of your Dyson will determine the exact filter type you need. You can find your model number on the vacuum itself, usually on a sticker located near the motor head or dustbin area.
Before ordering a replacement filter, check whether your current filter can be cleaned rather than replaced. Many Dyson filters are washable and can extend their lifespan significantly through regular cleaning. However, once a filter has been washed multiple times or shows visible damage like tears or permanent discoloration, replacement becomes necessary.
Practical Takeaway: Locate your Dyson model number and check the product manual or Dyson's website to identify your specific filter type. This information is essential before purchasing a replacement and ensures you order the correct part for your vacuum.
Locating Your Dyson Filter and Accessing It Safely
The location of your Dyson filter depends on your vacuum model. In upright Dyson models, the main filter is typically located at the top of the machine, accessed by lifting a cover or pressing a release button. The pre-filter, if your model has one, may be positioned separately, often near the motor head. For cordless stick vacuums, filters are usually found near the dustbin or in the motor head area. For robotic Dyson models, filters are typically located underneath or on the side of the unit.
Before accessing your filter, unplug your Dyson vacuum from the electrical outlet. This is an important safety step that prevents accidental activation while you're working with the machine. If you have a cordless model, make sure the battery is fully inserted but powered off. Some cordless Dysons have a power button on the handle that you should press to ensure the unit is completely off before removing the battery.
Refer to your product manual for the exact location of your filter on your specific model. Dyson manuals are available on the company's website by searching for your model number. The manual will include diagrams showing exactly where the filter sits within your vacuum and how to safely remove it. Having the manual on hand while you work prevents confusion and reduces the risk of damaging other vacuum components.
When accessing the filter area, work in a well-lit space where you can see clearly. Have a clean cloth or paper towel nearby to wipe your hands, as filters collect dust and debris. Some people prefer to work over a trash can or sink to minimize dust spreading throughout their home. If your vacuum has been used recently, allow the motor to cool before handling the filter area.
Practical Takeaway: Gather your manual, unplug the vacuum, and identify the exact filter location before beginning work. This preparation prevents accidents and ensures you can proceed confidently through the replacement process.
Removing the Old Filter Correctly
Once you've located your filter and prepared your workspace, the removal process is straightforward. Most Dyson filters are held in place by either a simple clip, a twist-lock mechanism, or a push-button release. If your model uses clips, gently press or lift the clips to release the filter. If it's a twist-lock design, rotate the filter counterclockwise until it comes free. For push-button models, press the designated button while pulling the filter out gently.
As you remove the filter, some dust and debris will likely fall out. This is normal and expected. You can minimize mess by holding the filter over a trash can while removing it. Avoid shaking the filter vigorously or tapping it hard, as this can damage the filter material and potentially scatter particles into the air. If you have allergies or respiratory sensitivities, consider wearing a dust mask during this step.
Inspect the removed filter carefully as you take it out. Look for visible damage such as tears, holes, or areas where the filter material appears matted down. Check the rubber gasket or seal around the filter edges—these components ensure the filter fits snugly and prevents unfiltered air from bypassing the filter. If you notice damage to the gasket, you may need to order a replacement gasket along with your new filter.
Place the old filter in a bag or container so you don't lose it. Even if you're replacing it, keeping it temporarily allows you to compare it with your new filter to ensure they're the same size and style. This verification step provides extra confidence that you've ordered the correct replacement part.
Practical Takeaway: Remove the old filter slowly and carefully over a trash can, inspecting it for damage before setting it aside. This careful approach minimizes mess and helps you verify that your replacement filter is the correct type.
Purchasing the Correct Replacement Filter
When purchasing a Dyson replacement filter, accuracy is essential. Ordering the wrong filter size or type will mean your new filter won't fit properly, leaving your vacuum unable to function correctly or at all. The most reliable way to find the correct filter is through Dyson's official website. Enter your model number into their parts finder tool, which will display all compatible filters for your specific vacuum.
Dyson filters are available through multiple retailers, including Dyson's official store, Amazon, Bed Bath & Beyond, Walmart, Best Buy, and other home appliance retailers. Prices typically range from $60 to $100 for original Dyson filters, depending on the model. Some retailers offer bundle deals that include multiple filters or combine filters with cleaning tools.
When shopping, verify the product listing includes your exact model number. For example, a filter for a Dyson V11 is different from a filter for a Dyson V15, even though both are cordless models. The product description should clearly state which Dyson models the filter is compatible with. If the listing doesn't specify compatibility, contact the seller before purchasing.
Third-party replacement filters are available at lower prices, typically ranging from $20 to $50. These filters are manufactured by companies other than Dyson but are designed to fit Dyson vacuums. While these filters may function adequately, Dyson filters are engineered specifically for Dyson vacuums and may provide better performance and longer lifespan. If you choose a third-party filter, ensure it has positive customer reviews and clear compatibility information with your model.
Practical Takeaway: Use Dyson's official parts finder or verify your model number carefully before purchasing. Original Dyson filters cost more but offer guaranteed compatibility and performance, while third-party options provide savings if you choose verified, well-reviewed products.
Installing Your New Filter and Ensuring Proper Fit
Before installing your new filter, examine it closely. Original Dyson filters typically come with protective plastic wrapping or a plastic cover that must be removed before installation. Some filters also have small paper tags or stickers attached for shipping protection. Remove all external packaging and protective coverings, as leaving these on will block airflow and prevent your vacuum from functioning properly.
Hold the new filter up to the light and look through it to check for any obvious defects or damage that may have occurred during shipping. The filter material should appear uniform in color and texture. If you notice tears, punctures, or significant discoloration, contact the retailer immediately for a replacement.
Insert the new filter into its location using the reverse process of removal. If your model uses a clip system, slide the filter into place and secure the clips. For twist-lock filters, insert the filter and rotate it clockwise until it clicks or locks into
Related Guides
More guides on the way
Browse our full collection of free guides on topics that matter.
Browse All Guides →