🥝GuideKiwi
Free Guide

How to Replace Your Car Remote Battery

Understanding Car Remote Batteries and When They Need Replacement Car remotes operate using small, button-cell batteries that power the transmitter inside th...

GuideKiwi Editorial Team·

Understanding Car Remote Batteries and When They Need Replacement

Car remotes operate using small, button-cell batteries that power the transmitter inside the fob. These batteries typically last between three and four years under normal use, though some may wear out sooner depending on how frequently you use the remote. Understanding what type of battery your remote uses and recognizing the signs of a dying battery can help you address the issue before you're locked out of your vehicle.

The most common car remote batteries are lithium coin cells, with CR2032, CR2025, and CR2016 being the standard sizes found in most vehicles manufactured in the last 20 years. The numbers on the battery indicate its dimensions: the first two digits represent the diameter in millimeters, and the last two digits represent the thickness in tenths of a millimeter. A CR2032 battery, for example, is 20 millimeters in diameter and 3.2 millimeters thick. These batteries typically cost between $3 and $8 each at most retailers, making them an inexpensive maintenance item.

Signs that your remote battery needs replacement include buttons that require harder pressing than usual, a reduced range where the remote only works when held very close to the vehicle, or complete failure where certain buttons stop functioning while others still work. You may also notice that the remote stops responding intermittently or requires repeated button presses to activate the door locks or trunk.

Practical Takeaway: Write down your vehicle's year, make, and model, then check your owner's manual or the existing battery in your remote to identify which battery type you need before you experience a complete failure.

Locating and Opening Your Car Remote

Before you can replace the battery, you need to open the remote housing. Most car remotes manufactured since the 1990s use a simple two-piece plastic casing held together by a small seam. The opening method varies slightly by manufacturer, but the general principle remains the same: locate the seam running around the edge of the remote and apply gentle pressure to separate the two halves.

Look for a small slot or indentation on the edge of the remote where you can insert a thin, flat object. Many remotes have a designated slot near the key ring attachment point or along one of the longer edges. A flathead screwdriver, butter knife, or even a coin works well for this purpose. Insert your chosen tool into the slot and gently twist or pry to create separation between the two pieces. Some remotes may have a small arrow printed on the casing indicating the direction to slide the two halves apart.

If your remote doesn't have a visible slot, look along the seam for any slight gap. Try applying steady pressure with a flathead screwdriver all along the seam, moving slowly from one end to the other. Avoid using excessive force, as this can crack the plastic casing and render the remote unusable. If the remote seems stuck, you can try wrapping a rubber band around the blade of your screwdriver or the edge of your coin to increase grip without slipping.

Once you've successfully separated the two halves, you'll see the internal circuitry. The battery is typically held in a small metal or plastic clip, sitting in a designated compartment. Some remotes have a rubber button pad that may fall out when you open it—this is normal and can be easily replaced.

Practical Takeaway: Take a photograph of the battery's current position and orientation before removing it, so you know exactly how to install the replacement battery in the correct direction.

Removing and Identifying the Current Battery

Once your remote is open, locating the battery is straightforward. The coin-cell battery sits in a shallow recessed area, usually held in place by a small metal or plastic clip that covers one edge. To remove the battery, gently lift or slide this clip away from the battery, then carefully pry the battery out of its compartment using a fingernail, plastic tool, or the edge of your screwdriver. Never use force—the battery should come out with minimal pressure.

Before discarding the old battery, examine it closely. The battery's model number is printed or embossed on the top surface. Write down this number or take a photograph, as this is the exact battery type you need to purchase as a replacement. If the number is not clearly visible, you can also look up your vehicle's make and model online to find the standard battery type used in that model's remote. Many vehicle manufacturer websites and automotive forums maintain databases of this information.

Pay attention to the battery's orientation—there is a positive side (marked with a + sign) and a negative side. This orientation matters when you install the new battery. In most remotes, the positive side faces upward toward the circuitry, though some designs reverse this. Your photograph from the previous step will confirm the correct orientation for your specific remote.

At this point, it's worth checking whether the battery contacts inside the remote appear clean and free of corrosion. If you see any white, blue, or green discoloration on the metal contacts where the battery sits, you can gently clean these using a pencil eraser or a cotton swab slightly dampened with rubbing alcohol. Allow the contacts to dry completely before inserting the new battery.

Practical Takeaway: Store the old battery in a safe location if you plan to have a spare, or dispose of it at a battery recycling center—most retailers that sell batteries also accept old ones for recycling at no charge.

Purchasing the Correct Replacement Battery

Once you've identified the battery type your remote uses, you have several options for purchasing a replacement. Major retailers including Walmart, Target, Best Buy, and drugstore chains like CVS and Walgreens stock common remote batteries like CR2032 in both their physical stores and online. Prices typically range from $3 to $8 per battery, though buying in bulk packages of two or four can reduce the per-unit cost. Amazon and other online retailers also offer these batteries, often with free or low-cost shipping for Prime members.

When shopping, verify that you're purchasing the exact battery type your remote requires. Look at the packaging to confirm the model number matches what was printed on your old battery. Most batteries are sold individually or in multipacks, and they typically come with a printed card or blister pack that displays the model number prominently. Reading the packaging carefully prevents the frustration of purchasing the wrong size.

Consider buying a small multipacks when possible. Having spare batteries on hand means you won't be caught off guard if another remote battery dies, or if you have multiple vehicles with remotes. Batteries have an indefinite shelf life when stored in cool, dry conditions, so there's no downside to keeping extras available. Many people keep a spare battery in their wallet, glove compartment, or home office for convenience.

One important note: while generic-brand batteries cost less than name brands, they perform identically for remote applications. Batteries from retailers' house brands, as well as batteries from known manufacturers like Panasonic, Energizer, and Duracell, all meet the same technical standards for coin-cell batteries. The difference in price reflects marketing and packaging rather than performance.

Practical Takeaway: Purchase your replacement battery from a location you frequent regularly, so you can obtain it immediately when needed rather than waiting for shipping, and ask the retailer if they have a battery recycling program for your old battery.

Installing the New Battery and Reassembling the Remote

With your new battery in hand, the installation process is straightforward and takes only a few seconds. Hold the battery with the positive side (+) facing the direction it faced in your old battery—typically upward. Carefully position the battery into the compartment where the old one sat, ensuring it sits flat in the recessed area. Then slide or lift the metal or plastic clip back into place to secure the battery. The battery should sit snugly without rattling or shifting when you gently shake the remote.

Before closing the remote, it's worth taking a moment to verify that the rubber button pad is in its correct position if your remote has one. This pad contains conductive material that completes the circuit when you press the buttons. Align it so that each button corresponds to its designated spot on the circuit board, then carefully lower the battery compartment cover back into place. Some remotes have small posts or alignment marks to help position this pad correctly.

Now comes the reassembly stage. Take your two remote halves and carefully align the seams so they fit together evenly. If

🥝

More guides on the way

Browse our full collection of free guides on topics that matter.

Browse All Guides →