🥝GuideKiwi
Free Guide

How to Clean Your Whirlpool Refrigerator Guide

Understanding Your Whirlpool Refrigerator's Interior Layout Before you start cleaning your Whirlpool refrigerator, it helps to understand how the interior is...

GuideKiwi Editorial Team·

Understanding Your Whirlpool Refrigerator's Interior Layout

Before you start cleaning your Whirlpool refrigerator, it helps to understand how the interior is organized. Most Whirlpool refrigerator models feature removable shelves, drawers, and compartments designed to maximize storage and airflow. The fresh food section typically occupies the main refrigerator compartment, while the freezer section sits above or below depending on your model. Knowing where these parts are located allows you to remove them safely and clean each area thoroughly.

The shelves in a Whirlpool refrigerator are usually made of tempered glass or plastic and rest on adjustable support rails. These rails allow you to customize shelf height based on what you're storing. The crisper drawers, often located at the bottom of the fresh food section, are designed with humidity controls to keep produce fresher longer. Many Whirlpool models also include a deli compartment or dairy section with its own temperature controls. Understanding these features means you can clean around them without causing damage.

The door compartments deserve special attention during cleaning. Most Whirlpool refrigerators have multiple shelves built into the door for storing condiments, butter, and beverages. These areas collect spills and residue over time. The rubber gaskets that seal the refrigerator door are critical components that keep cold air inside. Knowing where these gaskets run around the door frame helps you clean them properly without accidentally pulling them loose.

Your Whirlpool refrigerator likely has a drain system at the back of the fridge to handle condensation. This small drain hole, usually located near the bottom back wall, can become clogged with food particles or debris. Understanding this system's purpose explains why cleaning it regularly is important for your refrigerator's performance.

Practical takeaway: Before cleaning, review your Whirlpool refrigerator's user manual to identify your specific model's layout. Take photos of the arrangement before you start removing items so you can reorganize efficiently afterward.

Preparing Your Refrigerator for Cleaning

Proper preparation makes the cleaning process more efficient and helps prevent food spoilage. Begin by unplugging your Whirlpool refrigerator from the electrical outlet. This is an important safety step that protects you from electrical hazards while you're working inside and around the appliance. Some people choose to turn off the refrigerator using the control panel instead, which keeps the compressor from running while you work. However, unplugging offers an extra layer of safety and is the recommended approach for thorough cleaning projects.

Next, remove all food items from your refrigerator and place them in coolers with ice or in a secondary refrigerator if available. This protects your food from warming up during the cleaning process. If you don't have access to extra cooling, work quickly and keep the refrigerator door closed as much as possible between steps. Group perishable items together so they stay cold longer. Most foods can remain at safe temperatures for about two hours if kept in an insulated cooler with ice. If your cleaning project will take longer, consider doing it in sections—clean the freezer first while keeping the fresh food section closed, then switch to the fresh food section.

Before removing shelves and drawers, check how they're installed. Some Whirlpool models have shelves that simply rest on support rails and can be lifted straight out. Others may have shelves that need to be tilted at an angle to remove. Forcing a shelf that doesn't come out easily can damage both the shelf and the refrigerator frame. If you're unsure, consult your user manual for removal instructions specific to your model.

Place a towel or mat on the floor beneath your work area to catch any water or spills during the cleaning process. This protects your flooring and makes cleanup easier. Have clean cloths, sponges, and cleaning supplies gathered before you start so you're not searching for materials while food sits in coolers.

Practical takeaway: Set aside at least two to three hours for a thorough refrigerator cleaning. Gather all supplies beforehand, including cleaning solution, cloths, coolers, and ice. This prevents interruptions and helps your food stay at safe temperatures throughout the process.

Cleaning Removable Shelves, Drawers, and Compartments

Removable shelves and drawers accumulate spills, sticky residue, and food particles that require targeted cleaning. To clean glass or plastic shelves, wash them in your kitchen sink or bathtub using warm water and mild dish soap. This removes most food debris and spills. For stubborn, dried-on spots, let the shelves soak in warm soapy water for 10 to 15 minutes before scrubbing. Use a soft sponge or cloth rather than abrasive scrubbers, which can scratch the surface. Avoid using harsh chemicals or bleach on shelves, as these can damage the material and potentially contaminate food storage areas when the shelf is returned to the refrigerator.

Crisper drawers require special attention because they maintain moisture to keep produce fresh. These drawers often have small vents or slits that can trap debris. Clean the interior and exterior with a damp cloth and mild soap. Pay attention to the edges and corners where dust collects. If your Whirlpool model includes humidity control sliders on the crisper drawers, clean these mechanisms gently—they're delicate and control important airflow within the drawer. After washing, dry the drawers completely with a cloth before returning them to the refrigerator.

Door compartments and shelves need individual attention. Remove each shelf carefully and wash in warm soapy water. These areas often collect sticky residue from bottles and jars. For dried-on spots, try using a mixture of equal parts white vinegar and water. This natural solution cuts through grease without harsh fumes or chemicals. Wipe down the inside of the door itself, paying special attention to the areas where shelves rest. Dust and crumbs often accumulate in these grooves.

For any compartment with rubber or plastic seals, avoid soaking or submerging these parts if possible. The seals can absorb water and become damaged. Instead, wipe them with a damp cloth and dry immediately. If your refrigerator has specialized compartments like a deli drawer or wine cooler section, clean these using the same warm soapy water method, but be extra careful with temperature-control mechanisms if present.

Practical takeaway: Clean all removable items thoroughly in the sink before returning them to the refrigerator. This prevents bacteria growth and removes residue that could attract pests. Ensure everything is completely dry before reinstalling to prevent mold and mildew.

Cleaning the Interior Walls and Hard-to-Reach Areas

Once you've removed shelves and drawers, you can access the interior walls of your Whirlpool refrigerator. Start by wiping down all interior surfaces with a soft, damp cloth. For most cleaning tasks, plain warm water works well on glass or plastic walls. If you encounter sticky spots or mold, use a mixture of one tablespoon of baking soda dissolved in one quart of warm water. This natural cleaner is effective and safe for food storage areas. Spray or apply this solution to problem areas and let it sit for a few minutes before wiping. For stubborn mold or mildew, a solution of equal parts white vinegar and water can be more effective, though the vinegar smell will dissipate over time.

The corners and crevices inside your refrigerator deserve attention because they collect crumbs, dust, and spills that can harbor bacteria. Use an old toothbrush or small cleaning brush to reach these tight spaces. Work methodically from top to bottom so that any drips run downward and don't recontaminate cleaned areas. If your Whirlpool refrigerator has wooden trim or decorative elements inside, avoid excessive moisture. Wipe these areas quickly with a damp cloth and dry immediately to prevent water damage.

The back wall of your refrigerator is particularly important because it houses the drain system. This area may have a small drain hole, typically located near the bottom corner. Food particles, mold, and mineral deposits can block this drain, reducing your refrigerator's efficiency. To clean the drain, flush it gently with warm water using a turkey baster or small syringe. If it remains clogged, a thin pipe cleaner or straightened paperclip can help dislodge

🥝

More guides on the way

Browse our full collection of free guides on topics that matter.

Browse All Guides →