How to Build Your Own Cornhole Board
Understanding Cornhole Board Basics and Dimensions Cornhole is a lawn game that has become popular at backyard gatherings, tailgates, and casual outdoor even...
Understanding Cornhole Board Basics and Dimensions
Cornhole is a lawn game that has become popular at backyard gatherings, tailgates, and casual outdoor events across the United States. The game involves tossing bean bags at wooden boards that have a hole in them. Understanding the standard dimensions of a cornhole board is essential before you begin your building project, as these measurements ensure your boards will work properly with regulation gameplay.
According to the American Cornhole Organization, official cornhole boards measure 48 inches long, 24 inches wide, and stand 12 inches tall at the high end. The hole itself should be 6 inches in diameter and positioned 9 inches from the top of the board. The board should be tilted at an angle of approximately 4 degrees, which means the front of the board sits lower than the back. These specifications matter because they affect how bean bags travel across the surface and whether they'll fall into the hole.
The playing surface is typically made from birch plywood or similar material, which provides a smooth yet slightly textured surface that allows bean bags to slide at a consistent speed. The frame that supports the plywood can be constructed from 2x4 lumber or similar wood pieces. The hole is the most important feature to get right, as it must be large enough for bean bags to fall through but positioned correctly so the game remains challenging.
Many people build two cornhole boards as a set, since the game is played with teams standing at opposite boards. The boards are placed 27 feet apart during official play, though casual games can be played at closer distances. Understanding these baseline dimensions will help you plan your materials list and construction approach.
Practical Takeaway: Before starting your project, draw out the board dimensions on paper or use a computer program to visualize your design. This planning step prevents costly mistakes and ensures your finished boards will function properly.
Gathering Materials and Tools You'll Need
Building a cornhole board requires specific materials and tools, most of which you can find at any hardware or home improvement store. Having everything on hand before you start prevents interruptions and makes the building process more efficient. Here's what you'll need to gather.
For materials, start with plywood for the playing surface. A sheet of 3/4-inch birch plywood or sanded pine plywood works well and typically costs between $30 and $50 per sheet. You'll also need 2x4 lumber for the frame—typically four pieces, each 48 inches long, and four pieces, each 24 inches long. These generally cost $3 to $5 per board. You'll want deck screws (2.5 inches long), which cost around $8 to $12 per box, and wood glue ($5 to $8 per bottle). Sand paper in various grits (80, 120, and 220) costs $2 to $5 per pack.
For finishing touches, consider wood stain or paint if you want to customize the appearance. Exterior wood stain costs $15 to $30 per quart, while outdoor paint runs $20 to $40 per quart. Some builders add rubber feet or felt pads to the bottom to protect grass and reduce sliding—these cost $5 to $15 for a set.
Essential tools include a circular saw or miter saw for cutting lumber, a drill with bits for making pilot holes, a jigsaw for cutting the 6-inch hole, a measuring tape, a carpenter's square, and a sander (or sandpaper and a sanding block). Many people have these tools already, but if you need to purchase them, expect to spend $100 to $300 on a basic set. Many hardware stores also rent tools by the day for $10 to $25, which can be more economical than buying.
Practical Takeaway: Create a detailed shopping list organized by category (lumber, fasteners, finishing materials, tools) and bring measurements with you to the store. This approach prevents buying incorrect sizes and reduces shopping time.
Building the Frame and Preparing the Plywood
The frame serves as the structural foundation of your cornhole board, so constructing it correctly is crucial. The frame keeps the plywood flat and provides the angled support that gives the board its 4-degree tilt. Building a sturdy frame prevents warping and ensures your board will last through many seasons of play.
Start by cutting your 2x4 lumber to the correct lengths: four pieces at 48 inches for the length and four pieces at 24 inches for the width. Lay out the frame on a flat surface in a rectangular shape. Use wood glue on the joints and then secure them with 2.5-inch deck screws—use at least three screws per corner for maximum strength. Pre-drill holes before inserting screws to prevent the wood from splitting. The frame should form a solid rectangle measuring 48 inches by 24 inches on its outer edges.
Next, you'll prepare the plywood sheet. Cut your plywood to fit inside the frame, measuring approximately 46.5 inches by 22.5 inches. This slightly smaller measurement allows the plywood to sit inside the frame rather than on top of it. Before attaching the plywood, locate where the hole should go: 9 inches from the top of the board and centered left to right (12 inches from either side). Mark this center point clearly with a pencil.
Use a jigsaw to cut the 6-inch diameter hole in the plywood before you attach it to the frame. Mark the circle with a compass or trace around a bucket or large can. Drill a starter hole first, then use the jigsaw to carefully cut the circle. Sand the edges of the hole smooth with medium-grit sandpaper. Once the hole is cut, attach the plywood to the frame using wood glue and 1.25-inch screws spaced every 6 inches around the perimeter.
Practical Takeaway: Test-fit the plywood on the frame before permanently attaching it. This check ensures all measurements are correct and the hole is in the right position, preventing wasted materials and time.
Creating the Proper Angle and Support Legs
The 4-degree angle is what makes cornhole gameplay function correctly. Without this tilt, bean bags won't slide toward the hole, and the game becomes unplayable. Creating proper support legs that maintain this angle requires some geometry but is straightforward when you follow the measurements.
Your board should be 12 inches tall at the back and approximately 9.5 inches tall at the front (accounting for the 48-inch length and 4-degree angle). You can calculate this using the tangent of 4 degrees, which equals approximately 0.07. Multiply 48 inches by 0.07, which gives you about 3.4 inches of height difference. This means if the back is 12 inches, the front should be roughly 8.6 inches.
Build four legs from 2x4 lumber cut to appropriate heights: two rear legs at 12 inches and two front legs at 8.6 inches. These legs should be positioned at each corner of the frame and secured with deck screws and wood glue. Some builders create angled cuts on the top of the legs so the frame sits more securely, though perpendicular cuts work fine if you use adequate fasteners.
Before finalizing the leg placement, test the board's angle using a level or angle finder. Place the level on the playing surface from front to back. It should show approximately a 4-degree tilt. You can verify this by measuring the height difference between front and back. This testing step ensures your board will function correctly and play fair for all users.
Consider adding cross-bracing between the legs for added stability, especially if your board will experience heavy use or be transported frequently. Cross-bracing also makes the board more rigid and resistant to wobbling. Use 2x4 pieces cut at angles to connect the legs diagonally.
Practical Takeaway: Build a simple testing tool by marking a 4-degree angle on a piece of cardboard using a protractor. Use this to verify your angle before finalizing leg installation, preventing the need to rebuild if the angle isn't correct.
Finishing and Protecting Your Cornhole Board
Finishing your cornhole board protects the wood from weather damage and extends the board's life
Related Guides
More guides on the way
Browse our full collection of free guides on topics that matter.
Browse All Guides →