How to Build a Murphy Bed Guide
Understanding Murphy Bed Basics and Design Principles A Murphy bed, also called a wall bed, is a bed that folds up into a wall or cabinet when not in use. Th...
Understanding Murphy Bed Basics and Design Principles
A Murphy bed, also called a wall bed, is a bed that folds up into a wall or cabinet when not in use. This design allows a room to serve double duty—functioning as a bedroom at night and a living space, office, or storage area during the day. The bed is mounted on a pivot hinge system that lets it swing up vertically against the wall or into a cabinet frame. When closed, the bed takes up minimal floor space, typically only a few inches of wall depth.
The concept originated in 1912 when inventor William Lawrence Murphy patented the design. Murphy needed extra space in his small apartment and created a bed that could fold into the wall, allowing his living room to feel larger. Today, Murphy beds remain popular for studio apartments, tiny homes, guest rooms, and multipurpose spaces. Modern versions come in many styles and sizes, from twin beds occupying about 3 feet of wall width to queen-size beds requiring roughly 5 feet of wall space.
Murphy beds operate through a system of springs, hinges, and counterbalance mechanisms. When you lower the bed, it unfolds smoothly from the wall. Quality mechanisms use gas springs or pneumatic cylinders that hold the bed at the halfway point, making it easier to operate without excessive force. The bed frame includes a support leg or legs that extend when the bed is lowered, stabilizing it against the wall.
Different Murphy bed designs exist for various needs. Vertical beds fold straight up against the wall. Horizontal beds fold to the side. Some designs include built-in storage, desks, or shelving that surrounds the bed when it's closed. Corner-mounted versions maximize space efficiency in rooms with awkward layouts. Understanding these variations helps you determine which style works best for your space and daily routine.
Practical Takeaway: Before starting construction, measure your wall space carefully, consider how often you'll use the bed, and think about what furniture or activities you want in the room when the bed is closed. These decisions will guide your design choices throughout the project.
Planning Your Space and Taking Measurements
Proper measurement and planning determine whether your Murphy bed will function smoothly and fit your lifestyle. Start by measuring the wall where you plan to install the bed. For a vertical Murphy bed, you need wall height equal to the bed length plus 12-18 inches for the frame and mechanisms. A queen-size bed measures 80 inches long, so you need at least 92-98 inches of wall height. The wall width depends on the bed size: a twin bed needs about 39 inches of wall width, a full-size bed needs roughly 54 inches, and a queen-size bed requires approximately 60 inches.
Examine the wall construction before beginning. Use a stud finder to locate wall studs, which are vertical wooden supports typically spaced 16 inches apart. Murphy beds must mount directly to studs or to blocking attached between studs, as drywall alone cannot support the weight. Check for electrical outlets, light switches, windows, doors, and baseboards within your measurement area. These obstacles may require adjustments to your planned location. Test the wall for plumb using a level—walls should be perfectly vertical, and significant tilting may affect bed operation.
Consider the floor space in front of the bed when it's lowered. A queen-size bed extending from the wall requires approximately 20-24 inches of floor clearance for the bottom of the bed frame. If you plan to use the room for other activities when the bed is down, ensure this space won't interfere with desk chairs, tables, or walking paths. Measure ceiling height as well; you need at least 8 feet of vertical clearance, though 9 feet is more comfortable to prevent feeling cramped when the bed is lowered.
Create a detailed floor plan on graph paper showing the bed's location when both closed and open. Mark the positions of doors, windows, light switches, and outlets. Include measurements for the clearance needed around the bed frame when it's lowered. This visual planning reveals potential problems before you purchase materials or begin cutting and building. Take photos of the wall from multiple angles to review the layout and identify any obstacles that might interfere with construction or operation.
Practical Takeaway: Write down all measurements on a checklist—wall height, width, stud locations, ceiling height, and floor clearance. Double-check each measurement twice. These numbers become your blueprint for every cutting and assembly decision ahead.
Selecting Materials and Building Your Frame
Building a Murphy bed requires structural materials that can safely support your weight night after night. Quality hardwood is traditionally used, though plywood offers a budget-friendly alternative. For the bed frame itself, 2x10 or 2x12 lumber provides proper support for the mattress and your body weight. The cabinet frame that houses the bed should use 3/4-inch plywood for strength and durability. Avoid particle board or thin plywood, as these materials flex under stress and may not provide adequate support or longevity.
The hinge mechanism is the heart of your Murphy bed system. You can purchase complete Murphy bed hinge kits that include pre-engineered hardware designed to handle repeated opening and closing. These kits typically cost between $400 and $1,500 depending on quality and bed size. Kits include the pivot hinge, support legs, gas springs, and mounting hardware. Alternatively, some builders fabricate hinges from heavy-duty piano hinges and add gas springs for counterbalancing. This approach requires more skill but may reduce costs for those with welding or metalworking experience.
Additional materials include 2x4 lumber for internal bracing and frame supports, wood screws in various sizes, wood glue, sandpaper, finish stain or paint, and weatherstripping or magnetic latches to keep the bed closed when not in use. For the mattress area, you'll need high-quality slats or plywood decking to distribute weight evenly. Avoid thin materials that may sag over time, as this causes the bed to bind when closing and reduces comfort.
Calculate material quantities carefully. A queen-size Murphy bed cabinet typically requires approximately 25-30 sheets of 3/4-inch plywood, depending on whether you include surrounding storage or desks. Purchase extra lumber for test pieces and practice joints. Many builders recommend buying 10-15% more material than your calculations suggest, accounting for mistakes, waste, and learning cuts.
Practical Takeaway: Invest in a quality hinge kit from a reputable manufacturer rather than attempting to improvise the mechanism. The hinge system bears all operational stress, and poor-quality hardware leads to binding, misalignment, and safety hazards. A good kit costs more initially but ensures years of reliable function.
Building and Installing the Cabinet Frame Structure
Construction begins with building the cabinet frame that will house the folded bed. This framework must be absolutely square and rigid, as any warping or twisting causes alignment problems that make the bed difficult or impossible to operate smoothly. Start by building the frame on the floor, then lift it into position on the wall.
Construct the frame using 2x4 lumber according to your design specifications. The frame should be slightly narrower and shorter than your planned opening so it fits into the space without binding. For example, if your wall opening is 60 inches wide, build a frame that's 59.5 inches wide. Build a sturdy base, three sides (top, bottom, left, and right), and horizontal cross-members that will support the bed hinge mechanism. Use diagonal bracing on the back to prevent racking—the frame twisting or losing its square shape.
Before lifting the frame onto the wall, dry-fit all pieces and check that corners are perfectly square using a carpenter's square. Measure diagonally from corner to corner; if both diagonal measurements are equal, your frame is square. Any difference of more than 1/8 inch indicates the frame is racked and needs adjustment. Sand all interior surfaces smooth to prevent splinters and to allow the bed to move smoothly.
Mark stud locations on the wall with a pencil. Using a level, draw a horizontal line showing the center of the frame's location on the wall. With help from another person, lift the frame into position and use temporary bracing to hold it level and plumb while you secure it. Drive 3-inch wood screws through the frame sides into wall studs every 16 inches for secure mounting. Ensure the frame is perfectly level using a 4-foot level, as even slight tilting causes the bed to drift when fol
Related Guides
More guides on the way
Browse our full collection of free guides on topics that matter.
Browse All Guides →