🥝GuideKiwi
Free Guide

How Ram Truck Suspension Systems Work

Understanding Ram Truck Suspension Basics A suspension system is the network of components that connects your Ram truck to its wheels. The primary purpose is...

GuideKiwi Editorial Team·

Understanding Ram Truck Suspension Basics

A suspension system is the network of components that connects your Ram truck to its wheels. The primary purpose is to absorb bumps and uneven road surfaces while keeping the tires in contact with the pavement. Without a suspension system, every pothole, rock, and rough road would transfer directly to the frame and cabin, making the truck uncomfortable to drive and potentially causing damage to cargo and mechanical parts.

Ram trucks use several types of suspension configurations depending on the model and intended use. Light-duty Ram 1500 models typically use independent front suspension, while heavy-duty Ram 2500 and 3500 models generally use solid axle front suspension for greater load-carrying capacity. The rear suspension varies by model but commonly includes either coil springs, leaf springs, or airbags.

The suspension system works by converting the vertical movement of the wheels into controlled motion. When a wheel hits a bump, springs compress to absorb the impact. Shock absorbers then dissipate the energy from that compression, preventing the springs from bouncing repeatedly. Stabilizer bars reduce body roll during turns, and control arms maintain proper wheel alignment and control movement in multiple directions.

Ram suspension systems are engineered to handle different tasks. The light-duty 1500 is designed for daily driving comfort and moderate towing capacity (around 12,000 to 14,000 pounds depending on configuration). Heavy-duty models like the 2500 and 3500 can handle significantly heavier loads, with towing capacities reaching 37,000 pounds or more. This increased capacity requires a more robust suspension architecture with components built to withstand greater stress.

Practical Takeaway: Understanding that your Ram's suspension has different components working together—springs, shocks, bars, and arms—helps you recognize which part might need attention if you notice specific problems like excessive bouncing, one-sided sagging, or unusual handling characteristics.

Spring Systems in Ram Trucks

Springs are the foundation of any suspension system. They store and release energy to support the truck's weight and absorb impacts from the road. Ram trucks use different spring configurations depending on model type and intended purpose. The three main spring types found in Ram trucks are coil springs, leaf springs, and air springs.

Coil springs are circular metal coils that work by compressing when weight is applied. They're commonly found in the front suspension of Ram 1500 models and offer a smooth ride because they can compress more gradually than other spring types. Each coil spring is designed with a specific spring rate, measured in pounds per inch of compression. A spring rated at 500 pounds per inch means you need 500 pounds of force to compress it one inch. Ram engineers select spring rates based on the truck's weight, intended load capacity, and desired ride characteristics.

Leaf springs consist of multiple curved metal leaves stacked together, held by a center bolt. These are traditional suspension components frequently used in Ram truck rear suspensions and in front suspensions of heavy-duty models. Leaf springs provide several advantages for work trucks: they can support significant weight, provide natural lateral stability, and have a progressive spring rate that becomes stiffer as more load is added. This means a lightly loaded truck rides relatively smoothly, but as weight increases, the springs gradually become stiffer to prevent excessive sag and maintain proper ride height.

Air springs, found in some Ram heavy-duty models and high-end 1500 variants, use pressurized air in chambers instead of metal springs. Air suspension systems often include a compressor that maintains pressure and can automatically adjust to maintain consistent ride height regardless of load. This technology provides exceptional comfort over rough terrain and helps maintain level positioning when towing trailers. Some Ram models offer air suspension as an option that can be retrofitted, though this represents a significant investment.

Ram introduced the new TRX model in 2021 with adaptive suspension technology that uses active damping to adjust firmness in real-time. While not strictly a spring innovation, this system works with coil springs to modify how the suspension responds during different driving conditions, enhancing both comfort during highway driving and performance during off-road use.

Practical Takeaway: When experiencing suspension issues, identifying which spring type your Ram uses helps determine the problem. Excessive bouncing after bumps suggests shock absorber failure. Gradual sagging over time suggests springs are fatigued and may need replacement, particularly if your truck regularly carries heavy loads.

Shock Absorbers and Damping Technology

Shock absorbers (also called dampers) are fluid-filled cylinders that control how quickly springs compress and extend. Without shock absorbers, springs would continue bouncing up and down long after hitting a bump, creating an unsafe, uncomfortable ride. When you hit a pothole, the spring compresses to absorb the impact, then the shock absorber regulates how fast the spring pushes back, dissipating the energy as heat through hydraulic fluid.

Ram trucks typically use hydraulic shock absorbers that contain pressurized oil and nitrogen gas. As the piston rod inside the shock moves, it pushes oil through internal channels called orifices. These small openings create resistance that slows the spring's movement. The nitrogen gas provides a cushion that prevents the shock from bottoming out completely when experiencing severe compression. Most Ram trucks come equipped with twin-tube or monotube shock designs. Twin-tube shocks have an inner and outer tube, with the outer tube serving as a reservoir for excess fluid. Monotube shocks are more compact and typically provide better performance because the piston rod separates the working fluid from the gas, preventing fluid aeration.

Damping is controlled in two directions: compression damping occurs when the shock is being compressed (the wheel moving up), and rebound damping occurs when the shock is extending (the wheel moving down). Ram engineers calibrate these rates differently to optimize comfort and handling. Slower rebound damping creates a smoother ride but can allow more body roll in turns. Faster rebound damping improves handling and reduces body roll but can feel harsh on rough roads.

Many newer Ram models offer variable damping technology that adjusts shock stiffness based on driving conditions. The Ram 1500 DT generation (2019 and newer) offers the Electronic Automatic Leveling Suspension (EALS) system that uses electronically controlled dampers. This system monitors wheel movement thousands of times per second and adjusts damping in real-time, automatically lowering the rear suspension when towing to maintain level truck attitude, then raising it when empty. The TRX model features even more advanced active suspension technology that continuously adjusts all four corners for optimal performance.

Shock absorber failure is one of the most common suspension problems in Ram trucks. Signs include excessive bouncing after bumps, difficulty controlling the truck during braking (nose diving), or one corner sitting lower than others. Ram recommends inspecting shocks every 50,000 miles and replacing them typically between 50,000 and 100,000 miles depending on driving conditions and load.

Practical Takeaway: If your Ram feels like it's bouncing excessively after hitting bumps or if the truck doesn't settle quickly, the shock absorbers likely need inspection. A simple test: push down on a corner of the truck bed and release; the truck should drop and come back up once or twice, then settle. More than three bounces typically indicates worn shocks.

Stabilizer Bars and Control Arm Geometry

Stabilizer bars (also called anti-roll bars or sway bars) are horizontal rods that connect the left and right suspension sides. When a truck turns, weight transfers to the outer wheels. Without a stabilizer bar, the outer springs compress more than inner springs, causing excessive body roll. The stabilizer bar resists this transfer by forcing the inner and outer springs to work together, reducing body tilt during turns. Ram trucks typically have stabilizer bars on both front and rear suspension, with stiffer bars reducing roll but potentially transferring more bump harshness to the cabin.

Ram offers adjustable stabilizer bars on some models, allowing owners to increase or decrease stiffness. Stiffer settings improve handling and stability when towing, while softer settings provide a smoother ride on bumpy roads. Many Ram truck owners adjust their stabilizer bars depending on whether they're towing or driving empty, optimizing for their intended use.

Control arms are the rigid links that connect wheels to the frame, controlling up-and-down wheel movement while maintaining proper alignment. Ram 1500 models typically use double-wishbone front suspension with upper and lower control arms forming an A

🥝

More guides on the way

Browse our full collection of free guides on topics that matter.

Browse All Guides →