Get Your Free Starlink Router Password Reset Guide

Understanding Starlink Router Password Reset Basics

A Starlink router password controls who can connect to your wireless network. When you first receive your Starlink equipment, the router comes with a default password printed on a sticker attached to the device. This password allows your devices—phones, laptops, tablets, and computers—to connect to the internet service that Starlink provides. Over time, you may want to change this password for security reasons, or you might forget the original password and need to reset it to regain access.

Resetting your Starlink router password is a process that removes the current password settings and either restores the default password or allows you to create a new one. This differs from other types of resets. A soft reset changes only the password, while a factory reset restores all settings to how they were when the router shipped from the manufacturer. Understanding the difference matters because a factory reset will also clear any custom network names or settings you have configured.

The Starlink router is a rectangular white device that typically sits in a window or high location in your home to receive the satellite signal. It connects wirelessly to your devices and uses a built-in modem to communicate with Starlink satellites. The password protects this connection, preventing neighbors or passersby from using your internet without permission.

Many users find themselves needing password assistance within the first few months of service. Common scenarios include moving the router to a new location and misplacing the original password documentation, household members changing the password without recording the new one, or simply forgetting a self-created password after several months of use.

Practical takeaway: Locate the physical router and look for the sticker on the bottom or back that displays the original default password. Write this information in a secure place, such as a password manager or locked note on your phone, before attempting any resets.

Locating Your Starlink Router and Default Password Information

Your Starlink router is the white rectangular device included in your Starlink kit. During initial setup, Starlink technicians or your installation materials should have shown you where to place it. The ideal location is near a window facing south in the Northern Hemisphere or north in the Southern Hemisphere, with a clear view of the sky. The router typically comes in a compact box measuring about 7 inches by 7 inches by 3 inches, making it easy to place on a shelf, windowsill, or mounting bracket.

The default password appears on a sticker attached directly to the router itself. This sticker usually sits on the bottom of the device or on the back panel. The sticker contains important information printed in small text: the network name (SSID), the default password, the device's MAC address, and sometimes a QR code that can be scanned with a smartphone camera. The network name typically follows a pattern like "Starlink-1234" where the numbers are unique to your equipment.

If you cannot locate the physical router, check your installation paperwork or the box it shipped in. Some Starlink customers receive printed documentation with this information. Others may have received setup instructions via email or through the Starlink app. The Starlink mobile application, available on both Android and iOS devices, may also display your network information if you logged in during initial setup. You can search your email inbox for messages from Starlink that contain setup instructions.

The default password is generated specifically for your router and differs from every other Starlink router. This means you cannot use someone else's password or a generic Starlink password. If the sticker is damaged, faded, or missing entirely, the only way to recover the original password is through a factory reset, which will restore the router to its original state and display the password once again.

Practical takeaway: Before attempting any reset procedure, spend 10 minutes searching your home for the router and checking the sticker. Check desk drawers, filing cabinets, and storage areas where installation materials may be kept. If you find the sticker, photograph it with your phone for future reference.

Performing a Soft Reset to Restore Your Password

A soft reset is the process of restoring your Starlink router to display its original default password without losing any custom configurations you may have made. This method works when you know the current password but want to revert to the original one, or when you want to recover the original password after making changes. The process involves accessing the router's web interface through any internet-connected device.

To begin, open a web browser on any device currently connected to your Starlink network—a laptop, tablet, or computer. Type "192.168.100.1" into the address bar and press Enter. This IP address is the local access point for Starlink routers. The browser will load a login page with fields for username and password. The default username for Starlink routers is typically "admin," and the password is the one printed on your router sticker. If you do not know the password, you cannot access this interface without first doing a factory reset.

Once you log in successfully, look for a menu option labeled "Advanced," "Settings," or "System." Different firmware versions may label these differently. Within this menu section, you should see an option for "Reset," "Restore," or "Password Reset." Select this option. The router will ask you to confirm the action. Some versions require you to wait 60 seconds before the reset completes. During this time, the lights on the router may blink or change color, which is normal behavior.

After the reset completes, the router will restart automatically. This process typically takes 2 to 5 minutes. During this time, your internet connection will be unavailable. Once the restart finishes, the router will display the original default password again, and your custom network settings will remain intact. Any devices previously connected should reconnect automatically.

Practical takeaway: Write down the date and time you perform this reset, along with any changes you made to the network. Keep a log of password changes in a secure location to prevent future confusion.

Performing a Factory Reset When You Cannot Access Settings

A factory reset returns your Starlink router to the exact condition it left the manufacturer. Use this method when you cannot access the web interface because you have forgotten the password, or when troubleshooting connection problems suggests that corrupted settings are causing issues. A factory reset erases all custom settings, including network names you may have created and any parental controls you configured. After the reset, the router will function exactly as it did when you first unpacked it.

To perform a factory reset, locate the small reset button on your Starlink router. This button is typically found on the bottom of the device and requires a thin, pointed object to press—such as a paperclip, straightened bobby pin, or the tip of a ballpoint pen. The reset button is intentionally small and recessed to prevent accidental presses. Some models may have the reset button on the back panel instead of the bottom. If you cannot see it clearly, consult your router's physical documentation or search online for your specific model number.

Before pressing the reset button, unplug the router from its power source and wait 30 seconds. This ensures the device is completely powered down. Then plug the router back in and wait for the startup sequence to complete. The lights should indicate that the device is fully operational. Once the startup is complete, use your thin pointed object to press and hold the reset button for approximately 10 to 15 seconds. The button should feel like it has a slight give when pressed correctly. Hold it steadily—releasing too early may not trigger the reset.

While you hold the button, the router's LED lights will likely turn off or change color dramatically. This indicates that the reset process has begun. Once you release the button, the router will restart. This restart can take 5 to 10 minutes. During this time, all lights may cycle through different colors or flash repeatedly. Do not unplug or restart the router during this process, as interrupting it can cause serious problems. When the restart completes, the router will be returned to its original factory state, and the default password will be restored. Any connected devices will be disconnected and will need to be reconnected using the original password from the sticker.

Practical takeaway: Take a photo of the router from multiple angles before attempting a factory reset. If the reset button is difficult to locate, having clear photos will help you find it or assist if you need to contact support later.

Creating a New Password and Securing Your Network

After you have recovered your default password, you