Get Your Free Inground Pool Closing Guide

Understanding Pool Closing Basics

Pool closing is the process of preparing an inground pool for winter months when it will not be in use. This seasonal maintenance task helps protect your pool equipment, structure, and water chemistry during cold weather. Depending on where you live, pools typically need closing sometime between September and November, though the exact timing depends on local climate conditions.

The main goal of closing a pool is to prevent damage from freezing temperatures. When water freezes, it expands and can crack pipes, damage pumps, filters, and the pool structure itself. By properly closing your pool, you reduce the risk of costly repairs come spring. The process involves draining water to the correct level, treating chemicals, removing equipment, and covering the pool.

Understanding your pool's specific needs is important because different pool types may have slight variations in closing procedures. Vinyl-lined pools, concrete pools, and fiberglass pools all have different structural considerations. Additionally, pools in regions with harsh winters need more thorough preparation than those in milder climates. The depth of your pool and the type of equipment you have also affect how you should proceed.

Many pool owners choose to close their pools themselves rather than hiring professionals, which can save several hundred dollars. However, the process requires attention to detail and the right materials. A solid understanding of the steps involved helps ensure you protect your investment properly.

Practical Takeaway: Start planning your pool closing 4-6 weeks before the first expected freeze in your area. Research what specific equipment you have installed and whether your pool has any unique features that might affect the closing process.

What Information the Guide Covers

A comprehensive inground pool closing guide typically walks you through each step of the process in order. The guide explains what materials you'll need to purchase, how to prepare your equipment, and the proper sequence for completing each task. This information-based approach helps you understand the "why" behind each step, not just the "what."

The guide covers chemical treatment extensively, explaining how to balance your pool water before closing. This includes information about pH levels, alkalinity, calcium hardness, and chlorine content. You'll learn why these measurements matter and what target ranges to aim for. The guide explains which chemicals to add and in what order, since adding chemicals in the wrong sequence can reduce their effectiveness.

Most guides include detailed instructions about equipment shutdown and removal. This section typically describes how to safely drain your pump, filter, and heater. It explains where water should be drained to and how to identify freeze-prone areas in your plumbing system. The guide may include diagrams showing typical pool equipment setups to help you identify your own components.

Winterization techniques are another key focus area. The guide explores different methods for protecting pool plumbing, such as using air compressors to blow out lines and plugging return jets. It explains the purpose of each protective measure and how to execute them safely. Information about pool covers—including different types and installation methods—is typically included as well.

Practical Takeaway: Review the table of contents before reading to identify which sections are most relevant to your pool setup. Mark sections that apply to your specific pool type and equipment configuration.

Chemical Treatment and Water Balance

Proper chemical treatment is one of the most critical aspects of pool closing. Before shutting down your pool, the water chemistry must be balanced to prevent algae growth, staining, and equipment damage over the winter. An unbalanced pool can develop serious problems by spring that are expensive to correct.

The guide explains how to test your pool water using test kits or strips. You'll learn about four key measurements: pH level (the acidity or alkalinity of the water), total alkalinity (which helps stabilize pH), calcium hardness (which prevents corrosion and staining), and chlorine residual (which prevents algae). Each measurement has an ideal range when closing your pool.

pH levels should be between 7.2 and 7.6 for pool closing. If your pH is too high, you can add acid to lower it. If it's too low, you can add alkalinity increaser. The guide provides information about how much chemical to add based on your pool's volume. Total alkalinity should typically be between 80 and 120 ppm (parts per million). This measurement helps keep your pH stable throughout the winter.

Calcium hardness prevents your pool structure and equipment from corroding. The target range is usually 200-400 ppm, depending on your pool type. If your water is too soft, you may need to add calcium chloride. The guide explains that soft water can pull minerals from concrete or grout, while hard water can cause scaling and cloudy water.

Chlorine levels should be between 2-4 ppm at closing time. Some guides recommend adding extra chlorine treatment called "shock" before closing to ensure the water stays clean throughout winter. The guide will explain the difference between regular chlorine and shock treatments and when each is appropriate.

Practical Takeaway: Test your water chemistry at least one week before your planned closing date. This gives you time to make adjustments if readings are outside the target ranges.

Equipment Shutdown and Protection

Your pool's mechanical equipment—pump, filter, heater, and skimmer—needs specific protection during winter. Leaving equipment exposed to freezing temperatures without preparation can lead to cracked pipes, broken pump seals, and damaged filter tanks. The guide provides step-by-step information about safely shutting down each component.

The first step is usually turning off your pump and filter system. The guide explains how to locate the main power switch and describes the safety considerations for working with electrical equipment. After powering down, water remaining in the pump, filter, and pipes can freeze and expand, causing cracks. The guide walks you through draining these components safely.

Drain plugs are typically located at the bottom of your pump housing and filter tank. Opening these plugs allows water to flow out into a suitable drainage area. The guide explains that you may need a wrench or specific tools depending on your equipment type. After draining, you should leave drain plugs open or remove them completely so any residual water can seep out as temperatures drop.

Skimmer baskets and pump strainer baskets should be emptied and removed to prevent damage from frozen debris and expanding ice. The guide describes where these baskets are located and how to remove them safely. It explains that these removable parts should be stored indoors in a dry location during winter.

The guide typically covers using an air compressor to blow out plumbing lines. This technique uses compressed air to push remaining water out of pipes that run from the pump to the pool and back. The guide explains the correct air pressure to use and describes safety precautions, since high-pressure air can be dangerous if not handled properly. Some guides recommend using specialized plugs to seal off return lines after blowing them out.

For pools with heaters, the guide provides information about draining the heater and protecting it from weather. Some heater types need antifreeze solutions added to internal passages. The guide explains whether your heater type requires this step.

Practical Takeaway: Before you start the shutdown process, photograph your equipment setup from multiple angles. These photos will help you remember how everything was connected when you're ready to reopen in spring.

Pool Cover Selection and Installation

A pool cover serves multiple functions during winter: it keeps debris out of the water, reduces water evaporation, helps maintain chemical balance, and prevents algae growth by blocking sunlight. The guide explains different cover types so you can understand the options and choose what's appropriate for your situation.

Basic tarp covers are the most affordable option. These are simple plastic sheets that lay across the pool surface. The guide explains that while inexpensive, tarps don't prevent water from pooling on top, which can stress the cover and allow debris to sink into the pool if the tarp sags. Tarps work better as a secondary layer over more substantial covers.

Winter safety covers are specifically designed to withstand heavy snow and ice loads. These covers are anchored to the pool deck with springs or straps that distribute weight across the cover's surface. The guide explains that safety covers prevent accidental falls into the pool during winter and are often required by local codes if you have children or pets. Safety covers typically cost more than tarps but last several seasons with proper care.

Solid covers are made from reinforced plastic and are designed to keep water out while