Get Your Free Avital Remote Start Information Guide

What Avital Remote Start Systems Are and How They Work

An Avital remote start system is a technology that allows you to start your vehicle's engine from a distance, typically using a key fob or mobile app. The system uses radio frequency signals to communicate between your remote control and your vehicle's starter motor. When you press the button on your remote, the signal travels to a receiver installed in your car, which triggers the engine to crank and run.

Avital is a brand owned by Directed Electronics, a company that has manufactured automotive electronics and security systems since 1982. The systems are engineered to work with a wide range of vehicle makes and models, including both domestic and imported cars, trucks, and SUVs. Different Avital models offer varying features, from basic remote start capability to advanced systems that include two-way communication, GPS tracking, and smartphone integration.

The core components of an Avital remote start system include a control module that interfaces with your vehicle's electrical and ignition systems, a receiver that picks up signals from your remote, and relays that trigger the starter and ignition circuits. Professional installation is typically required because the system must be wired into your vehicle's factory wiring harness, and the installer must program the system to match your specific vehicle's electrical configuration.

Understanding how these systems function helps you recognize what information might be valuable in a guide about them. The remote start feature can provide convenience in cold weather when you want to warm up your engine before driving, or in hot weather when you want to cool down your car's interior. Some advanced models include safety features like a driver-present sensor that cuts the engine if someone tries to put the vehicle in gear without the key in the ignition.

Practical takeaway: Before looking for information about Avital systems, consider what features matter most to your needs—whether you want basic remote start, smartphone control, or additional security features. This will help you determine which information in a guide is most relevant to your situation.

Installation Requirements and Professional Setup

Installing an Avital remote start system requires professional installation in almost all cases. This is not a system you can install yourself without significant automotive electrical knowledge, specialized tools, and diagnostic equipment. A professional installer accesses your vehicle's steering column, dashboard, and engine compartment to connect the control module to specific wires in your factory wiring harness.

The installation process typically takes between two to four hours, depending on your vehicle's complexity. The installer must first locate the correct wires for your specific make, model, and year of vehicle. They use factory service manuals and wiring diagrams to identify the ignition, starter, and accessory circuits. The control module must be mounted in a secure location where it won't be exposed to excessive heat, moisture, or damage from moving parts.

During installation, the technician will test the system multiple times to ensure it functions correctly and doesn't interfere with other vehicle systems. They need to verify that the remote start works only when the transmission is in park (for automatic transmissions) or neutral (for manual transmissions), and that all safety features operate as designed. They'll also program the system to match your vehicle's specifications and test the remote at various distances to confirm signal strength.

Finding a qualified installer is important because poor installation can damage your vehicle's wiring, disable safety features, or create electrical problems that are expensive to repair. Avital maintains a network of authorized dealers and installers across the country. You can find installers through the official Avital website, or through car alarm and security shops that specialize in aftermarket automotive electronics. When choosing an installer, ask about their experience with your specific vehicle model and request references.

Practical takeaway: A guide about Avital systems should explain what to expect during professional installation, what questions to ask an installer, and what warranty coverage typically comes with the system. This information helps you understand costs and what happens after you purchase the system.

Compatibility and Vehicle Considerations

Not all vehicles are equally compatible with Avital remote start systems. The compatibility depends on your vehicle's year, make, model, and engine type. Generally, Avital systems work with vehicles manufactured from the mid-1980s onward, though some older vehicles may not be compatible due to their electrical system design. Newer vehicles with advanced security systems or push-button starts may require specialized modules or have more complex installation requirements.

Vehicles with automatic transmissions are typically simpler to work with because the system can easily detect when the transmission is in park. Manual transmission vehicles require an additional sensor to detect whether the clutch pedal is pressed, adding to the installation complexity and cost. Some vehicles have immobilizer systems—security features that prevent the engine from starting without the correct key—which may require additional components to bypass safely for remote start operation.

Hybrid vehicles and vehicles with push-button start systems present additional challenges. Hybrid systems require the system to interact with multiple power sources and battery management systems. Push-button start vehicles don't have a traditional ignition switch, so the installer must interface with the vehicle's smart key system. Some newer luxury vehicles may not be compatible at all, or may require dealership-specific programming that adds significant cost.

Vehicle age affects compatibility too. Older vehicles with simpler electrical systems are often easier and cheaper to equip with remote start, while newer vehicles with integrated computer systems and multiple networked modules require more sophisticated installation. A guide should explain how to determine whether your specific vehicle can be fitted with an Avital system and what factors might affect installation complexity and cost.

Practical takeaway: Before pursuing a remote start system, consult a guide that explains compatibility factors and helps you understand what questions to ask about your particular vehicle. This prevents wasted time exploring options that won't work with your car.

Features Found in Different Avital Remote Start Models

Avital offers several different remote start models at various price points, each with different features. Entry-level models provide basic remote start functionality—you can start your engine from up to a quarter mile away using a basic key fob remote. These systems typically include safety features like automatic engine shutdown if the vehicle isn't driven within a set time period (usually 15 minutes), and they cut off the engine if someone tries to put the car in gear without the key in the ignition.

Mid-range Avital systems add two-way communication to the remote control. Instead of just sending a signal to your car, the system sends a signal back to your remote, confirming that the remote start command was received and executed. This means your remote will beep or light up to show whether your engine successfully started. Some models in this range include auxiliary output controls, allowing you to trigger door locks or pop the trunk from your remote.

Advanced Avital systems include smartphone integration through a mobile app, allowing you to start your vehicle, lock or unlock doors, and monitor your vehicle's status from anywhere with cellular service. These systems use GPS to track your vehicle's location and provide theft recovery assistance. Some high-end models include sensors that tell you your vehicle's current temperature, fuel level, and battery voltage through your phone.

A guide should describe the specific capabilities of different models, including their range, battery life of the remote controls, and what additional features they offer. It should explain the difference between basic two-way remotes and smartphone-controlled systems, and discuss how features like turbo timer (which allows your diesel engine to cool down before shutting off) or temperature sensors might be valuable depending on your situation and climate. Understanding these differences helps you determine which system features would provide real value for your needs and driving habits.

Practical takeaway: A detailed guide helps you understand what different models actually do, so you can compare features against your actual needs rather than paying for capabilities you won't use or missing features you want.

Cost Factors and What Influences System Pricing

The cost of an Avital remote start system varies significantly based on multiple factors. The system itself—just the hardware—typically ranges from around $300 to $1,200 depending on the model and features. Basic models with single-way communication cost less than advanced models with two-way communication or smartphone integration. However, the hardware cost is usually much less than the installation cost.

Professional installation is the primary cost driver. Installation typically ranges from $400 to $1,500 or more, depending on your vehicle's complexity. A simple installation on a standard sedan with a basic electrical system might cost $400 to $600, while installation on a luxury vehicle with complex computer systems, push-button start, or a hybrid powertrain could cost $1,200 to $2,000. Some installers charge flat rates