🥝GuideKiwi
Free Guide

Get Your Free AirPods 4 Setup Guide

Understanding AirPods 4 Basic Features and Design AirPods 4 represent Apple's latest entry-level wireless earbuds, released in September 2024. These earbuds...

GuideKiwi Editorial Team·

Understanding AirPods 4 Basic Features and Design

AirPods 4 represent Apple's latest entry-level wireless earbuds, released in September 2024. These earbuds weigh just 4.3 grams each and measure approximately 21.3 millimeters in height, making them significantly smaller than previous generations. The charging case weighs 50.8 grams and uses USB-C connectivity, a shift from the Lightning connector used in earlier models.

The design includes silicone ear tips in multiple sizes—XS, S, M, and L—allowing for customized fit based on individual ear canal dimensions. This matters because proper fit directly impacts sound quality and battery performance. The earbuds feature a glossy finish on the top surface and matte finish on the bottom, with touch-sensitive areas on the stem for controls. Available in white, black, and starlight colors, the aesthetic remains consistent with Apple's minimalist design philosophy.

Battery capacity stands at approximately 48 mAh per earbud, with the charging case providing 440 mAh of additional power. With active noise cancellation disabled, users typically see around 4 hours of listening time per charge. Enabling active noise cancellation reduces this to approximately 3 hours. The case itself can fully recharge the earbuds multiple times, extending total usage to roughly 30 hours before requiring wall power.

  • Weight: 4.3 grams per earbud, 50.8 grams for case
  • Ear tip sizes: XS, S, M, and L available
  • Colors: White, Black, and Starlight
  • Connectivity: USB-C charging port
  • Battery: 4 hours per charge (ANC off), 3 hours (ANC on)

Practical Takeaway: Before beginning setup, identify which ear tip size feels most secure in your ears by testing each size. Finding the correct fit ensures the earbuds stay in place and deliver accurate sound during the initial configuration process.

Preparing Your Devices Before Setup Begins

Successful AirPods 4 setup depends on having compatible devices properly prepared. AirPods 4 work with iPhone, iPad, Mac, Apple Watch, and Apple TV. For optimal functionality, your devices should run current or near-current operating systems. iPhones need iOS 18.1 or later, iPads require iPadOS 18.1 or later, and Macs need macOS Sequoia 15.1 or later. Apple Watches should have watchOS 11.1 or later installed.

Before starting setup, charge your AirPods 4 fully using the USB-C cable included in the box. Place the case near your primary device—typically an iPhone if you own one, as Apple's ecosystem recognizes iPhones first during pairing. Ensure Bluetooth is enabled on your device. You can verify this by checking Settings on iPhone or iPad, or System Settings on Mac. For the best experience, have only one device nearby during initial setup, then add other devices afterward once the earbuds recognize one primary device.

Close any background apps that might interfere with the pairing process. This includes music streaming services, podcast apps, or other audio applications. Having these apps open can sometimes cause the AirPods to connect to unexpected sources. Additionally, restart your primary device before setup to clear any temporary software states that might affect Bluetooth connectivity. This takes roughly 2-3 minutes and significantly improves pairing success rates.

  • Update all devices to current operating system versions
  • Charge AirPods 4 completely using included USB-C cable
  • Enable Bluetooth on your primary device
  • Close background audio applications before pairing
  • Restart your device to clear temporary software states

Practical Takeaway: Create a checklist of your devices and their operating system versions before beginning setup. This prevents delays caused by outdated software and ensures smooth Bluetooth communication during the pairing process.

Step-by-Step Initial Pairing Process

The initial pairing process for AirPods 4 begins by opening the charging case near your iPhone, iPad, Mac, or Apple Watch. Within seconds, an animation should appear on your screen showing the AirPods with a "Connect" button. Tap this button to initiate pairing. The entire process typically takes 15-30 seconds once this animation appears on your screen.

If the animation doesn't appear, ensure the earbuds are inside the case and the case is at least within arm's reach of your device. Sometimes moving the case closer to your iPhone by a few inches triggers the pairing screen. If the animation still doesn't appear after 10 seconds, try pressing and holding the small button on the back of the charging case for about 3-5 seconds until the LED light on the front of the case flashes white. This puts the earbuds into pairing mode, allowing your device to discover them through standard Bluetooth settings.

Once you tap Connect on the animation screen, your device performs several background actions: it establishes a Bluetooth connection to the left earbud, establishes a connection to the right earbud, synchronizes settings with Apple's servers if you're signed into iCloud, and configures basic audio preferences. You may see prompts asking about ear tip fit or sound quality preferences. Responding to these prompts helps calibrate the audio output to your specific setup.

  • Open charging case within arm's reach of your device
  • Wait for pairing animation to appear on screen
  • Tap the "Connect" button when animation appears
  • If animation doesn't appear, hold case button for 3-5 seconds
  • Allow 15-30 seconds for complete pairing
  • Respond to ear tip and sound quality prompts

Practical Takeaway: Save a screenshot of your AirPods' pairing animation on your device before setup. If you need to re-pair later, having a visual reference helps you recognize the correct screen and confirm you're in the proper pairing mode.

Configuring Audio Settings and Preferences

After initial pairing completes, your AirPods 4 enter a configuration phase where you customize how they sound and behave. On iPhone or iPad, go to Settings, then Bluetooth, and locate your AirPods in the list of connected devices. Tap the "i" icon next to your AirPods name to open detailed settings. Here you'll find options for Ear Tip Fit Test, which measures whether your chosen ear tip size creates a proper seal.

The Ear Tip Fit Test plays a series of tones through each earbud while measuring audio reflection inside your ear canal. The test takes approximately 10-15 seconds per ear and provides feedback on whether your current ear tip size is optimal. If the test indicates a poor fit, try the next size up or down and retest. Proper fit significantly affects both sound quality and the effectiveness of active noise cancellation, so spending a few minutes on this step prevents frustration later.

Within these same settings, you can toggle Active Noise Cancellation (ANC) on or off. AirPods 4 use a single microphone configuration, which means ANC performance differs from higher-end models like AirPods Pro. The ANC in AirPods 4 focuses on reducing lower-frequency noise like aircraft engines or traffic rumble, but won't eliminate all ambient sound. Additionally, you can enable Transparency Mode, which uses microphones to let outside sound pass through for situational awareness.

  • Open Bluetooth settings and tap the "i" icon next to your AirPods
  • Run Ear Tip Fit Test to confirm proper seal
  • Toggle Active Noise Cancellation based on your preference
  • Enable Transparency Mode for ambient awareness
  • Set double-tap actions for left and right earbuds
  • Configure microphone input from either left earbud, right earbud, or automatic selection

🥝

More guides on the way

Browse our full collection of free guides on topics that matter.

Browse All Guides →