Free Guide to Replacing Mobile Home Skirting
Understanding Mobile Home Skirting and Why Replacement Matters Mobile home skirting serves as the barrier between the ground and the underside of your manufa...
Understanding Mobile Home Skirting and Why Replacement Matters
Mobile home skirting serves as the barrier between the ground and the underside of your manufactured home. This protective layer plays a crucial role in maintaining your home's structural integrity and energy efficiency. The skirting prevents animals from entering the crawl space, reduces heat loss through the foundation, and protects utility lines and pipes from freezing during cold months. Many homeowners don't realize that damaged or deteriorating skirting can lead to significantly higher heating and cooling costs—studies show that poor foundation insulation can account for 10-15% of a home's total energy loss.
Mobile home skirting typically lasts between 10 and 15 years, depending on climate conditions and material type. In areas with harsh winters, freeze-thaw cycles can crack skirting materials more rapidly. High humidity regions may experience faster deterioration due to moisture exposure. Common signs that skirting needs replacement include visible cracks, dents, discoloration, rust spots on metal skirting, missing sections, or gaps where animals can enter. If you notice drafts around the foundation or increased pest activity under your home, these often indicate skirting problems.
The cost of skirting replacement varies widely based on your home's size and your chosen material. A typical single-wide mobile home (14 feet wide by 60-70 feet long) might require 150-180 linear feet of skirting material. Replacement costs range from $1,500 to $5,000 or more, depending on whether you hire professionals or tackle the project yourself. This investment typically pays for itself within 3-5 years through improved energy efficiency and reduced utility bills.
Practical takeaway: Inspect your skirting annually, particularly before winter months. Early identification of damage prevents more expensive structural issues and maintains consistent temperatures in your home's crawl space.
Types of Mobile Home Skirting Materials
Several material options exist for mobile home skirting, each with distinct advantages and drawbacks. Vinyl skirting has become the most popular choice for replacement projects. It's lightweight, requires minimal maintenance, resists rust and rot, and comes in various colors that can complement your home's appearance. Vinyl typically costs between $8-15 per linear foot and lasts 15-20 years. However, it can become brittle in extreme cold and may warp if exposed to direct intense heat. Many homeowners appreciate that vinyl skirting can be installed relatively quickly and doesn't require painting or staining.
Metal skirting, usually aluminum or galvanized steel, offers strong durability and excellent protection against animal intrusion. Metal skirting typically costs $6-12 per linear foot and can last 20-30 years with proper maintenance. The main drawback is that metal conducts temperature, making it less energy-efficient than other options. Metal skirting also requires periodic painting or rust treatment to maintain appearance and prevent corrosion. In coastal areas where salt spray is common, metal skirting deteriorates more rapidly unless treated with special coatings.
Wood lattice or wood board skirting provides a traditional aesthetic but requires regular maintenance including painting, staining, and treatment for rot and insects. Wood costs $4-10 per linear foot initially but demands ongoing upkeep that can become expensive over time. Composite materials, made from wood fibers and plastic, offer a middle ground—they resist rot and insects like wood composites do while requiring less maintenance than solid wood. Concrete or masonry skirting is extremely durable and energy-efficient but is the most expensive option, costing $15-25 per linear foot and requiring professional installation.
Insulated skirting panels combine vinyl or metal facing with foam insulation backing. These panels cost more ($12-20 per linear foot) but provide superior energy efficiency—up to 20% better insulation value compared to non-insulated materials. This option makes particular sense in cold climates where foundation heat loss is significant.
Practical takeaway: Choose skirting material based on three factors: your climate conditions, budget constraints, and maintenance tolerance. Vinyl offers the best balance of affordability and durability for most situations, while insulated panels justify their cost in cold regions.
Preparing for a Skirting Replacement Project
Successful skirting replacement begins with thorough planning and preparation. Start by measuring your home's perimeter to determine how much material you'll need. Measure around the entire base of your mobile home, taking readings at multiple points since mobile homes aren't always perfectly rectangular. Add 10-15% extra to your calculations to account for waste, overlaps, and potential mistakes. Sketch a diagram of your home's footprint and note any special features like stairs, decks attached to the foundation, utility box locations, or areas where the ground slopes significantly.
Before ordering materials, assess the existing skirting condition and the state of the ground beneath it. If the existing skirting is in reasonable condition, you can install new skirting over it in many cases. However, if there's visible damage to the foundation frame or soil instability, you may need to address these issues first. Walk around your home's perimeter and check for areas where the ground has settled, creating gaps between the home and the soil. Significant settling might indicate foundation problems requiring professional evaluation before skirting work begins.
Gather the tools and materials you'll need. Essential tools include a measuring tape, circular saw or reciprocating saw (depending on your material), level, square, drill with appropriate bits, screwdriver or drill bits for fastening, work gloves, and safety glasses. For vinyl skirting, you'll need a utility knife and cutting tools designed for plastic. Metal skirting requires tin snips or a metal-cutting circular saw blade. You'll also need fasteners appropriate for your material and substrate—stainless steel screws for most applications, or aluminum fasteners if working with aluminum skirting.
Check local building codes and regulations before starting work. Some jurisdictions have specific requirements for skirting materials, ventilation provisions, or installation methods. Mobile home parks often have rules about skirting appearance and materials. Contact your local building department or mobile home park management to understand requirements. Some areas mandate specific ventilation rates under the home, which affects how skirting can be installed.
Practical takeaway: Create a detailed project plan including measurements, material lists, tool requirements, and timeline. Verify local regulations before purchasing materials to avoid costly mistakes or compliance issues.
Step-by-Step Installation Process for DIY Replacement
Removing old skirting is typically the first physical step. If the existing skirting is fastened with screws, simply remove all fasteners and carefully pull away panels. Metal skirting may be riveted, requiring a drill to remove rivets or careful prying to separate sections. Take care not to damage the mobile home's exterior wall during removal. Work systematically from one corner around the entire perimeter. Stack removed materials in an organized way since you'll need to dispose of them properly. This phase usually takes 4-8 hours depending on home size and fastener types.
Next, prepare the installation surface. Use a level to check the ground plane around your home's perimeter. If you're installing skirting directly on the ground, clear away vegetation, rocks, and debris. For vinyl or composite skirting installed at ground level, consider installing a leveling frame made from treated lumber or metal tracks. This frame ensures that your new skirting will be plumb (perfectly vertical) rather than following the natural slopes of the ground. Mark your starting point with chalk, typically at a corner or most visible location.
Begin installation at your marked starting point. Most skirting materials come with installation instructions specific to that product. For vinyl skirting, snap panels into J-channel or track systems, working your way around the home. Fasten panels every 16-24 inches with screws appropriate for your material. Leave 1/8-inch gaps between panels during installation to allow for thermal expansion in vinyl materials. Use a level frequently to ensure panels remain plumb as you progress. Metal skirting typically fastens directly to the home's frame using rivets or self-tapping screws spaced 12-16 inches apart.
When you reach corners and transitions, careful measurement becomes critical. Plan cuts to minimize waste and ensure seams occur in visually inconspicuous locations. Most vinyl skirting can be cut with a utility knife or circular saw with a fine-toothed blade. Metal skirting requires tin snips or a metal-cutting circular saw. Make cuts slowly and carefully to prevent cr
Related Guides
More guides on the way
Browse our full collection of free guides on topics that matter.
Browse All Guides →