🥝GuideKiwi
Free Guide

Free Guide to Clearing Washing Machine Drain Clogs

Understanding Washing Machine Drain Systems and Common Clogs A washing machine drain system is designed to remove water and debris from your drum after each...

GuideKiwi Editorial Team·

Understanding Washing Machine Drain Systems and Common Clogs

A washing machine drain system is designed to remove water and debris from your drum after each cycle. The system includes several components: the drain hose, the drain pump, the filter or trap, and the connection to your home's main drain line or utility sink. Water flows from the drum through these components and out of your home.

Clogs happen when material builds up inside any part of this system and blocks water flow. Common sources of washing machine clogs include lint, hair, small clothing items like socks, coins, buttons, and detergent residue. Over time, these materials accumulate and create blockages that prevent water from draining properly.

When your washing machine has a clog, you'll notice several warning signs. The most obvious is water remaining in the drum after the cycle ends. Your machine may also make unusual grinding or gurgling sounds during the drain cycle. Some machines will display error codes on their control panel when a drain problem occurs. You might notice a foul smell coming from the machine, which indicates standing water and bacterial growth. In some cases, water may back up into the utility sink or bathtub if the blockage is in the main drain line rather than the machine itself.

Different types of clogs require different approaches. A clog in the drain hose is usually easier to clear than a clog in the drain pump or filter. Knowing where the blockage is located will help you determine which clearing method will work best. This guide explores several methods you can try, starting with the simplest and moving to more involved techniques.

Practical Takeaway: Before attempting any clearing method, turn off and unplug your washing machine. Also locate your machine's drain filter access point and your home's water shut-off valve. Having this information ready will make the process faster and safer.

Clearing Drain Clogs Using the Built-In Filter

Most modern washing machines have a removable filter or trap located near the front bottom of the machine or behind an access panel. This filter catches lint, hair, and small objects before they enter the drain pump. Over time, this filter becomes clogged with debris, which prevents water from draining. Cleaning this filter is often the fastest way to restore drainage and costs nothing except a few minutes of your time.

To access and clean the filter, first unplug your machine from the electrical outlet. Next, locate the filter access. On front-loading machines, there's usually a small door or panel at the bottom front. On top-loading machines, the filter may be inside the agitator base or in a corner of the tub. Check your machine's manual if you're unsure where the filter is located. Some machines require you to remove a decorative panel or pull out a component to reach it.

Once you've located the filter, place towels on the floor beneath it because water will drain out when you open it. Some machines have a small drain plug you turn counterclockwise to release trapped water first. After draining, carefully remove the filter by turning or unclipping it, depending on your machine's design. You'll likely see a significant amount of lint, hair, and debris accumulated on and in the filter.

Rinse the filter under warm running water and use an old toothbrush to scrub away stuck-on material. For stubborn buildup, soak the filter in warm water mixed with a small amount of dish soap for 15 to 20 minutes, then brush again. Once the filter is clean, rinse it thoroughly and reinstall it by reversing the removal process. Close any access panels and plug the machine back in. Run a test cycle without clothes to confirm water drains properly.

Practical Takeaway: Clean your washing machine filter once monthly to prevent clogs from forming. This routine maintenance takes about 10 minutes and keeps your machine draining efficiently year-round. If you notice the filter needs cleaning every week, you likely have another issue upstream, such as a kinked drain hose or a clog in the pump.

Straightening and Flushing the Drain Hose

The drain hose is a rubber or plastic tube that carries water from your washing machine to your home's drain system. Over time, these hoses can become kinked, crushed, or clogged. A kinked hose restricts water flow even if there's no blockage inside. A clogged hose has material stuck inside it. Both problems prevent proper drainage. Checking and clearing the drain hose is an important troubleshooting step.

To inspect the hose, first unplug your machine and turn off the water supply valves behind the machine if possible. The drain hose is usually a single tube running from the back or side of the machine to a standpipe, utility sink, or main drain line. Carefully pull the machine away from the wall to access the hose fully. Look along its entire length for kinks, cracks, or areas where it's been pinched or crushed. Even a small kink can restrict water flow significantly.

If you find kinks, gently straighten them out. If the hose has cracks or splits, it needs replacement, which is a simple job involving two hose clamps and about 20 minutes of time. For a clogged hose, disconnect it from both the machine and the drain by loosening the hose clamps and sliding the hose off the connections. Have towels ready because there may be water inside.

Once the hose is disconnected, you can flush it to clear blockages. Hold one end over a bucket or bathtub and use a wet/dry shop vacuum or a garden hose to push water through from the other end. You may see lint, hair, or other debris come out. If the clog is stubborn, try using a plumbing snake or a straightened wire coat hanger to push through the blockage. Work gently to avoid puncturing the hose. Once water flows freely, reconnect the hose securely, making sure the hose clamps are tight enough that the connections don't leak but not so tight that they deform the hose.

Practical Takeaway: When reconnecting the drain hose, position it so it has a gentle downward slope with no sharp bends. This prevents water from pooling inside the hose and reduces future clogging. Also keep the hose end submerged in the drain rather than resting against the inside of a standpipe, as this reduces splashing and prevents backflow.

Using a Plumbing Snake to Clear Deep Clogs

When the drain filter is clean and the hose is clear but water still doesn't drain, the clog is likely deeper in the system, in the drain pump or in the main drain line beyond the machine. A plumbing snake, also called a drain auger, is a tool designed specifically for this situation. A basic plumbing snake costs between $15 and $40 and can be reused for many future clogs in your home, making it a worthwhile investment.

A plumbing snake is a long, flexible metal cable with a crank handle on one end. As you turn the handle, the cable rotates and pushes forward, breaking through clogs or pulling debris back toward you. For washing machine drains, a 25-foot snake is usually sufficient. Larger snakes designed for main drain lines are available but may be unnecessary for most household clogs.

To use a snake, first locate where the washing machine connects to your home's drain system. This is often a standpipe—a vertical pipe extending from the floor. The machine's drain hose inserts into the top of this pipe. Carefully remove the drain hose from the standpipe, holding it over a bucket to catch any water. Insert the snake's tip directly into the standpipe opening and push it in while turning the crank handle slowly. The snake will slide through the pipe and encounter any blockage downstream.

When you feel resistance, that's the clog. Keep turning the crank to break through it, pushing and pulling gently rather than forcing. You should feel the clog break apart or feel the snake catch something you can pull back up. Continue snaking until water flows freely through the opening. Test by pouring a bucket of water down the standpipe—it should drain without backing up. Once drainage is restored, reconnect your drain hose and run a test cycle on your machine.

Practical Takeaway: If you can't locate the standpipe or if snaking doesn't restore drainage, the clog may

🥝

More guides on the way

Browse our full collection of free guides on topics that matter.

Browse All Guides →