Free Guide to Changing Your Ring Notification Sound

Understanding Ring Doorbell Notification Settings

Ring doorbells send alerts to your phone, tablet, or computer when motion is detected or someone presses the doorbell button. These notifications keep you informed about activity at your front door, whether you're at home or away. The notification sound is what plays on your device when an alert arrives, and Ring gives you control over what sound plays and how loud it is.

By default, Ring uses a standard chime sound for notifications. This sound works well for many people, but some users find it too loud, too quiet, or simply want something different. Ring has built several options into their system that let you change the notification sound without any special technical knowledge. You can choose from pre-loaded sounds that Ring provides, or in some cases, use sounds already on your device.

The ability to customize notification sounds is available across most Ring products, including Ring Video Doorbells, Ring Doorbells, and Ring Floodlight Cameras. Whether you use an iPhone, Android phone, or access Ring through a web browser on your computer, there are methods available to change your notification sound. The process varies slightly depending on what type of device you use, but the general steps remain similar.

Understanding how notifications work on your specific device matters because Ring sends alerts through your phone's operating system. This means your notification settings in the Ring app work alongside your phone's overall notification settings. Sometimes people adjust one but forget about the other, which can lead to confusion about why their notification sound isn't working as expected.

Practical Takeaway: Before you start changing notification sounds, test your current setup by having someone ring your doorbell or trigger motion detection. Listen to what sound plays and note the volume level. This helps you understand what you want to change and whether it's the sound itself or the volume that needs adjustment.

Changing Notifications on iPhone and iPad

iPhone and iPad users can modify Ring notification sounds through the Ring app itself or through their device's Settings app. The Ring app is the primary place where most customization happens. To access these settings, open the Ring app and look for the menu icon, usually three horizontal lines in the corner of the screen. From there, you'll see options for Devices, then select the specific doorbell or camera you want to adjust.

Once you select your device, look for a settings or gear icon. This opens the device-specific settings page. Within these settings, you should find a section labeled "Notifications" or "Alert Settings." Tap on this section to see your available options. The Ring app typically offers several pre-loaded notification sounds to choose from. These might include options like "Classic Chime," "Modern Chime," "Bell," "Buzzer," or other variations. Browse through the available sounds and select the one that appeals to you.

After selecting a new sound, you can usually play a preview of that sound by tapping a play button next to it. This lets you hear what the notification will sound like before you confirm your choice. This preview feature is helpful because what looks good on a list might not sound the way you expected. Take time to listen to several options before deciding.

For iOS users, there's also a second layer of control through your iPhone or iPad's Settings app. Go to Settings, then find Notifications, and look for the Ring app in the list. Tap on Ring to access its notification settings at the system level. Here you can control whether notifications appear as badges, banners, or sounds, and you can also toggle sounds on or off entirely. Some users mute notifications at this level if they find Ring alerts too intrusive, then rely on the Ring app's own notification center to check for activity later.

One important thing to know: if you have notifications turned off in your iPhone's Settings app for the Ring app, then no notification sound will play even if you've selected a sound in the Ring app itself. Make sure notifications are enabled at both levels—in the Ring app settings and in your device's system settings.

Practical Takeaway: Test your new notification sound by asking someone to ring your doorbell from outside, or trigger motion detection if your Ring device has that feature. This confirms the sound you selected is actually playing and that you can hear it from different rooms in your home.

Changing Notifications on Android Devices

Android phones offer a similar process to iPhones, though the exact menu names and locations can vary depending on your phone model and Android version. Start by opening the Ring app and navigating to the main menu. Look for the three-line menu icon (often called a "hamburger menu") or a settings gear icon. Select your specific Ring device from the list of installed products.

From your device's settings page, find the section for notifications or alerts. Depending on your Ring app version, this might be labeled "Notifications," "Alert Settings," or "Sound." Tap on this section to view available notification sounds. Android versions of the Ring app typically offer a similar selection of pre-loaded sounds as the iPhone version. You'll see options to preview each sound before selecting it.

Select your preferred sound and tap to confirm your choice. Most Ring accounts allow you to set different notification sounds for different events—for example, you might want one sound when someone presses the doorbell button and a different sound for motion detection alerts. Look for these additional customization options on the same settings page. If you want someone ringing the doorbell to sound different from motion alerts, you can usually configure both separately.

Android's system-level notification controls work differently than iOS. Open your phone's Settings app and navigate to Apps or Application Manager. Find the Ring app in the list and tap on it. Look for Notifications in the app's settings menu. From here, you can control whether the Ring app is allowed to send notifications at all, and whether those notifications include sound. Make sure notifications are enabled here as well as in the Ring app itself.

On some Android phones, you may have additional options for notification channels. The Ring app might have separate notification channels for doorbell activity, motion detection, and other alert types. You can often customize the sound for each channel separately. This gives you fine control over what sound plays for different types of Ring activity.

Practical Takeaway: After changing your notification sound on Android, restart the Ring app completely by swiping it away from your recent apps list, then reopening it. This ensures your new settings are fully loaded. Then test the notification by triggering an alert to confirm the new sound is working.

Using Web Browser to Adjust Settings

If you access Ring through a web browser on your computer, you can also change notification settings through this method. Go to ring.com and log in with your Ring account credentials. Once logged in, click on the Settings gear icon, usually located in the top right corner of the page or in the main menu. From Settings, find the Notifications section.

The web interface may offer different customization options than the mobile app. Some notification settings are only adjustable through the web browser, while others are only available in the mobile app. For notification sounds specifically, the web browser often lets you manage which types of events trigger notifications and how you want to receive those notifications—through sound, email, or push notifications to your phone.

In the Notifications settings on the web, look for options related to how alerts are delivered. You might see checkboxes for "Sound," "Email," or "Push Notifications." Make sure the Sound option is checked if you want your phone to play a sound when an alert arrives. Some users prefer to receive email notifications but mute the sound notifications, or vice versa. The web interface lets you mix and match these preferences for different types of alerts.

The web browser also typically shows you a list of all your Ring devices. You can often set different notification preferences for each device. If you have both a front doorbell and a side camera, for example, you could make one play a notification sound and keep the other silent, or assign different sounds to each if your account allows it.

One advantage of using the web browser is that you can see all of your settings in one organized view. The mobile app sometimes breaks these settings across multiple screens or menus. Taking time to explore the web browser settings can help you understand what options are available and ensure your notification sounds are configured exactly the way you want them.

Practical Takeaway: Log into ring.com on your computer and write down your current notification settings before making any changes. This gives you a reference point. If you change something and don't like the result, you'll know exactly what to change back.

Troubleshooting Common Notification Sound Problems