Free Guide to Adjusting Clocks and Timekeeping

Understanding Time Zones and Their Purpose

Time zones divide the world into regions where people use the same local time. The Earth rotates 360 degrees every 24 hours, which means it turns 15 degrees per hour. Because of this, different parts of the world experience daylight and darkness at different times. To manage this reality, the world is divided into 24 main time zones, each roughly 15 degrees of longitude wide.

The prime meridian, located at 0 degrees longitude in Greenwich, England, serves as the reference point for global timekeeping. The time at this location is called Coordinated Universal Time, or UTC. All other time zones are measured as hours ahead of or behind UTC. For example, Eastern Standard Time in the United States is UTC-5, meaning it is five hours behind Greenwich. Japan Standard Time is UTC+9, meaning it is nine hours ahead.

Within the United States, there are four main time zones: Eastern, Central, Mountain, and Pacific. Eastern Time is the easternmost and experiences dawn earlier than western regions. As you move west, each zone is one hour behind the previous zone. So when it is noon in New York (Eastern Time), it is 11 a.m. in Chicago (Central Time), 10 a.m. in Denver (Mountain Time), and 9 a.m. in Los Angeles (Pacific Time).

Some U.S. territories and regions observe different time zones. Alaska Standard Time is UTC-9, and Hawaii-Aleutian Standard Time is UTC-10. Samoa, located in the South Pacific, is UTC-11. Understanding these zones matters when scheduling calls, flights, or events with people across different regions.

Practical Takeaway: When coordinating with someone in another time zone, locate both your zone and theirs on a time zone map, then count the hours difference. Writing times with the time zone abbreviation (for example, "2 p.m. EST") prevents confusion.

Daylight Saving Time: How and When It Changes

Daylight Saving Time, often called DST, is a practice in which clocks are set forward by one hour during warmer months and set back by one hour during cooler months. The goal is to extend evening daylight, which some argue reduces energy consumption and increases safety. In the United States, Daylight Saving Time begins on the second Sunday in March and ends on the first Sunday in November.

When DST begins in March, clocks "spring forward" one hour at 2 a.m. local time. This means that at 2 a.m., clocks jump to 3 a.m. The day is one hour shorter. When DST ends in November, clocks "fall back" one hour at 2 a.m. local time, jumping back to 1 a.m. This day has 25 hours instead of 24. During the spring-to-summer period, the time is called Daylight Time (for example, Eastern Daylight Time or EDT). During the fall-to-winter period, Standard Time is observed (for example, Eastern Standard Time or EST).

Not all U.S. states observe Daylight Saving Time. Hawaii and most of Arizona do not change their clocks. Some U.S. territories, including Puerto Rico, the U.S. Virgin Islands, and Guam, also remain on standard time year-round. A few counties in Indiana and parts of other states have their own rules about whether to observe DST.

For most people, the main impact of DST changes is remembering to adjust their clocks. Modern smartphones and computers usually change automatically, but older clocks, car dashboards, wall clocks, and appliances may require manual adjustment. In March, set clocks forward. In November, set clocks back. A helpful memory aid is "spring forward, fall back."

Practical Takeaway: Mark your calendar for the second Sunday in March and the first Sunday in November. On the evening before the change, set clocks to the new time, or allow automatic devices to update overnight. Check vehicle dashboards and appliances the morning after the change.

Adjusting Analog and Digital Clocks

Analog clocks have hands that point to numbers on a face. The hour hand is shorter and moves slowly, while the minute hand is longer and moves faster. Adjusting an analog clock requires understanding which direction to turn the hands and how to move them to the correct position.

Most analog clocks have a knob or crown on the back that you turn to adjust the time. Turning it clockwise (the direction the hands move) moves the time forward. Turning it counterclockwise moves the time backward. To set an analog clock, locate the small crown and turn it gently until the hour hand points to the correct hour and the minute hand points to the correct minute. For Daylight Saving Time changes, turn the crown clockwise to move forward one hour in March, and counterclockwise to move back one hour in November.

Some older analog clocks may have a different adjustment mechanism. Instead of a crown, they might have a small lever or a knob that requires you to hold it in a certain position while turning. Check the clock's back side or documentation to identify the correct method for your specific model.

Digital clocks display time using numbers on a screen. Most have buttons labeled "Mode," "Set," "Plus," or "Minus." To adjust a digital clock, first press the "Mode" or "Set" button to enter adjustment mode. The display may blink to show which part of the time is being adjusted (hours or minutes). Use the "Plus" button to increase the numbers and the "Minus" button to decrease them. Once the correct time is displayed, press "Mode" or "Set" again to confirm and exit adjustment mode. For Daylight Saving Time, adjust the hours either forward or backward by one hour using the same process.

Some digital clocks have a 12-hour format (showing 1 through 12 with AM or PM) while others use 24-hour format (showing 1 through 24). Make sure you understand your clock's format before adjusting it, as this affects whether 1 p.m. displays as "1:00 PM" or "13:00."

Practical Takeaway: Before adjusting any clock, look for instructions on the device itself or the original packaging. When using buttons on a digital clock, press buttons slowly and deliberately, observing the display to ensure you reach the correct time.

Automatic Time Updates on Modern Devices

Most modern devices, including smartphones, computers, and smart home devices, update their time automatically. These devices connect to networks that provide accurate time information, so manual adjustment is usually not necessary. Understanding how this process works can prevent confusion when devices seem to change their displays unexpectedly.

Smartphones running iOS (Apple) and Android (Google) connect to cell towers or internet networks that broadcast the current time. When Daylight Saving Time changes occur, the phone's operating system receives a signal and updates the device automatically, usually between midnight and early morning on the day of the change. Users typically do not need to do anything. However, you can check your phone's settings to verify that automatic time updates are enabled. On iPhones, go to Settings > General > Date & Time and turn on "Set Automatically." On Android devices, go to Settings > System > Date & time and turn on "Automatic date & time."

Computers using Windows or macOS also receive time updates from network time servers. Windows computers connect to the time server managed by the U.S. National Institute of Standards and Technology (NIST). If a computer is offline, it may not receive updates, so connecting to the internet periodically ensures accuracy. You can manually verify your computer's time in the system settings and toggle automatic updates on or off as needed.

Smart home devices, including smart speakers, thermostats, and security systems, typically update their time through Wi-Fi connections. If a device seems to show the wrong time, try restarting it or checking that it is connected to your home network. Some devices may have a manual time setting option in their app or control panel if automatic updates fail.

One important note: automatic updates may not work if your device's date is very far off from the actual date. If you have not used a device in months or years, you may need to manually set it closer to the current date before automatic updates will function properly.

Practical Takeaway